SOLD ROTAX 912/914 TANIS PREHEAT SYSTEM + THERMOSTASIS OIL TEMP CONTROL

ROTAX 912/914/915 TANIS ENGINE PREHEAT SYSTEM COMPLETE KIT + THERMOSTASIS OIL TEMP CONTROL + 4 A844-8D FITTINGS
 
Bench tested, very good condition

The Tanis preheat system will heat soak your engine before start and the Thermostasis oil temperature control module will maintain engine temps at optimum operating temperature through a wide range of ambient temperatures.

  • Eliminates condensation in engine and oil reservoir 
  • Reduces engine wear and extends oil life
  • Reduces fuel consumption
  • Considerably reduces warm up time for Rotax engine
  • Immediate windscreen demist and cabin heat
  • Self regulating, can be safely left on for extended periods of time
  • Energy efficient only 220W max draw as heat is transferred directly into engine and engine oil
  • faster preheat than bulky external air heaters
  • Eliminates clumsy oil radiator louvers or need for duct tape on radiator
  • Maintains optimum oil temperatures year round over wide range of ambient conditions
 
 
TANIS ENGINE PREHEAT SYSTEM ROTAX 912/914 115V TAS 100-52  (TSP4CYL-22579-115)
 
  • USA Cert 8130-3
  • Rapid installation 
  • Max draw 220W 1.9A at 115V, self regulated
  • 1ea  108 Main wiring harness c/w engine ground wire, fuse & 115V plug
  • 1ea.  TAS108 Crankcase Heat Element
  • 4ea.  TAS108-112 Cylinder heat element
  • 5ea.   A6 945751 Rotax Lock Washers New
  • 16ea. Nylon Tie Wrap 8"
  • 2ea.   Nylon Tie Wrap 16"
  • 1ea.   Tube SAF-T-EZE Anti-Sieze compound Mil-A-907E new
  • 1ea.   Plackard (Black)
  • 1ea.   Installation Instructions 185
  • 1ea.   Bonding instructions 186
  • 1ea.  TUO2778 bonding sealant or heat transfer silicone adhesive (Required)
 
THERMOSTASIS P6-H-190 ROTAX 912/914 OIL TEMPERATURE CONTROL UNIT
 
  • 190F/88C (maintains oil tank temp above 212F/100C)
  • 3/8" NPT ports
  • 3/8" or 1/2" oil lines
  • 6.2 oz 176g
  • Conveniently plumbs into existing Rotax oil lines (fittings included)
  • Low bypass - min 98% flow through radiator at high ambient temps
  • CNC 6061-T6  Type 2 anodized body
  • Calibrated thermal motor
  • Viton O-ring and stainless return spring
  • 3/16" mount holes
 
FOUR of AN844-8D 45 DEGREE FITTINGS
 
  • Four fittings included with kit  
  • aircraft grade anodized aluminum
  • 3/8" NPT
  • 1/2" Hose barb
  • meets Rotax requirements SL-912-011 minimum ID and radius
 
 
Asking $495 plus $50 international tracked EMS Express Post
Please contact Vic at vmenkal@mac.com

Views: 60

Reply to This

Replies to This Discussion

Hi Victor, I am interested in the Tanis heater. Please advise. Thanks

Hi Rodney.   I’m sorry just sold

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2023   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service