Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
CH 750 door mods
Have injected epoxy into the stiffener and now inserting the steel rod, it is the full length of the stiffener. Then just bond-do the hole up and paint.
Comment
-
Comment by KENNETH DRUMHELLER on February 8, 2012 at 1:30pm
-
Bill:
Sent you a comment earlier today but I don't believe you received it. I like how you reinforced your doors and plan on doing the same. I have a few questions. First, are the stiffners hollow and all you are really doing is reaming them out to 1/4" ? Do you think an aluminum rod would work as well and save a little weight? and lastly, approximately how much epoxy did you use for each rod? Would appreciate any help, Thank You.
Ken
-
Comment by Jim Nelson on September 21, 2011 at 9:11pm
-
Bill, I am begining the door instillation and I want to incorporate the stiffner mod. How has it worked out? 912S custom cowl. Did not like the Canadian nose cowl.
-
Comment by Bill Alexander on August 18, 2011 at 7:41am
-
Bob, used 1/4" rod.
-
Comment by Bob McDonald on August 18, 2011 at 7:21am
-
What size steel rod did you use?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers