After storing my tail section in a commercial storage facility for 2 years I was surprised to find corrosion on several of the parts. The storage area was free from the elements but not heated or cooled. I have disassembled the rudder and looked over all the parts. The hole in the leading edge is the only damage on the rudder. The only damage on the horizontal was the front spar and doubler. Any one else find this to be a problem? I was under the impression that 6061-T6 was very corrosive resistant. I am now planning to prime all interior parts. Besides zinc oxide what can I use? I am having a hard time finding zinc anymore.

Views: 694

Attachments:

Reply to This

Replies to This Discussion

Hi Jesse,

6061-T6 is more corrosion resistant than many other aluminum alloys but that is a relative statement. History tells us that Napoleon had his soldiers' uniforms made with shiny aluminum buttons... very snazzy for that day and time. The buttons corroded and fell off as they were exposed to the elements. Some cite this as one reason his troops were defeated in the Russian winter. Aluminum loves to oxidize. Back to the 601XL now.

I would definitley start over and replace any parts that had the corrosion shown in your photos. That is the minimum corrective action I would endorse. I used zinc oxide primer from rattle cans on the entire inside of my plane as the build progressed... I recommend the same to every builder. I have heard about the weight issue and I don't care. I would do it again.

I got all my primer from Aircraft Spruce.

Ed
Link to AS web page for zinc oxide primer.

http://www.aircraftspruce.com/catalog/cspages/ptizincoxideprimer.php

Ed
Thanks Ed.
Jesse - I viewed your photos; is it possible some outside substance (besides water) found its way onto the aluminum or the rivets? I have purposely left out some pieces of 6061-T6 out in the elements and have never witnessed that kind of corrosion.
They were kept in a rented storage facility along with other common household items. The building was new at the time when I rented it.
In the pictures where you see the cleco's Would suggest dissimiliar metals created the corrison. On the picture with the hole in the leading edge looks like the corrosion started on the outside. Was it leaning against something metal at or near that point?
the spar and spar doubler are both 6061-T6. They were part of the kit. I had my rudder leaning against the wall of the storage unit but not against the leading edge.
Oh my, Jesse,

I'm in the middle of construction and I really want to avoid this.

The corrosion is very localized, which is interesting. When I see something "rust", usually the whole piece is covered before anything "rusts" through. This would indicate that there was some notable event taking place, such as condensation stopping at those points or a direct contact with steel. If that was normal corrosion, there would be a lot of aircraft having the same problem. Please provide a little more details if you can.

What I've been doing (and I can't say that it's been tested) is coating my contacting surfaces with Rustoleum primer and paint. Regular WalMart stuff. I realize that the internal parts have been traditionally coated with zinc-chromate, but the whole outside of the craft is normally protected with nothing more than enamel primer and paint so the same type of system should be adequate for the internal parts as well.

Hope this helps.

Robert
I found rodent droppings in my storage unit which leads me to believe that possibly rodent urine is the cause. Only problem is that airplanes get rodents in them all the time. They build nests and do there business on and in the aircraft. That being said I would think that there would be concern about this with all types of aircraft.
Rodent urine is a definite no no. It will destroy steel in antique cars by severe rust. Also here in Nebraska, a man purchased an old plane of some type, got it started and was flying back to his home airport for inspection when a wing folded with fatal results. The final news item said failure of metal structure due to rodent urine related corrosion.
Your pictures really looking like some other agent is causing you corrosion. You might expect some milkiness to the look of your skins after storage but certainly nothing like what you have. If you have rodent the uric acid is extremely caustic to aluminum and a definite possibility. In terms of primers Zinc Chromate is going away due to environmental and health issues and being replaced by the new Zinc Phosphate. Aircraft Spruce has it as their part number 09-02127. Rust-Oleum is probably not a good choice as it is very heavy. You want something that etches the aluminum so that it bonds well and Zinc Phosphate would accomplish that. If you want to notch it up a bit you could use commerical products like Veri-Prime from DuPont or the two part etching primers from Randolph which I used on my RV project. Unfortunately those don't come in spray bottles.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service