Replies to This Discussion

Permalink Reply by Deane Philip on August 21, 2013 at 9:07pm

what year is the 912 and can I also have details on the warp drive

• ▶ Reply

Permalink Reply by dan waller on August 22, 2013 at 9:39pm

The engine was purchased new in Sept of 2006 and left crated until May 2008, when it was mounted on our

601HDS. The prop is a 3-blade ground adjustable warp drive with nickel plated edges. The engine is still on the plane you can see and hear it run.

• ▶ Reply

Permalink Reply by Deane Philip on August 22, 2013 at 10:09pm

hello again can you give me a price you would like for the prop also do you have a serial number for the 912 and is that correct only 15 hours why so low

• ▶ Reply

Permalink Reply by Deane Philip on August 25, 2013 at 4:50am

?

• ▶ Reply

Permalink Reply by dan waller on August 25, 2013 at 8:20pm

I am asking 300 for the prop but I don't want to sell it until the engine is sold. I want any potential

buyer to be able to hear the engine run. Shortly after I mounted the engine I was laid off, so I gave up

the hangar and moved the plane home. I get the plane out and taxi it once a month, get the temp up to prevent moisture and rust. The serial # on the engine is 5646678.

 

 

 

• ▶ Reply

Permalink Reply by Daniel C Hall on August 24, 2013 at 9:13am

Dan;  Where are you located?  

Dan

• ▶ Reply

Permalink Reply by dan waller on August 24, 2013 at 10:53pm

I am near Blue Mound IL

• ▶ Reply

Permalink Reply by Daniel C Hall on August 24, 2013 at 10:56pm

I'm just learning the site.  I found you on your bio page. 

• ▶ Reply