SOLD!!! Complete STOL CH 750 kit - unassembled in Arizona $15,000

I purchased kit #75-7801 on August 30, 2009 for $21,395.92. This is the complete airframe and finishing kit. It has long range fuel tanks, LED nav/pos lights, and a vortex generator kit. I built the vertical tail at the factory workshop back in 2009, before I earned my A&P. It is servicable but not not flawless.

I have clecoed the horizontal tail together. I have clecoed the rear fuselage together. Not a single rivet has been installed. I bought the kit hoping I could build it with my dad. That never happened. At this point I admit that I am a flyer and fixer, not a builder.

I also have a good core Corvair engine with new pistons, bearings, and a nitrided crank. I have over $2000 in William Wynne engine mount and engine parts.

No prop. No avionics.

I am a full time A&P at Falcon Field in Mesa. I live in north Phoenix. Thanks.

Wiggy Greacen
505 470 4047cell

Views: 1007

▶ Reply to This

Replies to This Discussion

Permalink Reply by Larry Nelson on April 28, 2014 at 9:37pm
How much for the crank?
Permalink Reply by Wiggy Greacen on April 29, 2014 at 12:57am
I am not offering to sell off parts and pieces. It is a package deal. $15k for everything listed. Picked up and paid for in Phoenix, Arizona. I am happy to help a new owner pack and ship, but I am not offering to deliver.
Permalink Reply by Howard Horner on May 1, 2014 at 8:32am

Hi Wiggy. I am very interested in what you are offering. I am curious who did your crank and what pistons you have. (This is not a deal breaker.)   Also, do you have any idea what it might take to convert this to the version 3? I am assuming the aluminum is straight and the parts are all well accounted for? Is the vortex kit in addition to, or to replace the standard leading edge slats?

Thanks, Howard

970-217-1519

Permalink Reply by Wiggy Greacen on May 1, 2014 at 11:27am
Howard - VGs are in addition to standard leading edge slats. Yes, aluminum is straight. Every single widget and screw supplied by Zenith is still in my possession.

I forgot to add that I have a full set of the DVDs from Homebuilt Help. It looks like they are charging $250 for these currently.

Question regarding upgrade to Version 3 should be directed to Seb or Roger. I don't know the answer.

Crank is GM factory nitrited from turbo Corvair. I will try to dig out one of WW's engine books and look up part number. I don't remember piston info. I will go get the box and look at them this weekend.
Permalink Reply by Wiggy Greacen on May 1, 2014 at 7:40pm
Sale Pending.
Permalink Reply by Wiggy Greacen on May 10, 2014 at 2:10pm
I registered this kit as N29WG. I talked to my local FSDO and Oklahoma City about the premature registration. The FAA directed me to send an affidavit stating that I jumped the gun (a ton by registering it before I had driven a single rivet) and "had neither applied for or been issued an air worthiness certificate. This will allow me to deregister an unbuilt kit. The new owner will retain full ability to register, comply with 50% rule, and apply for airworthiness certificate. I talked to Roger Dubbert at Zenith and he said the new owner just needs to contact Joyce, fill out 1 form and will be put in Zenith's records as owner to get on the builder's network and buy parts, etc.

Please ask if you have any questions.
Permalink Reply by steve larson on May 11, 2014 at 9:12am

Is the kit still for sale?

Permalink Reply by Wiggy Greacen on May 11, 2014 at 12:54pm
Yes. The kit is available for sale again.
Permalink Reply by Wiggy Greacen on May 17, 2014 at 1:48pm
The kit sold today. Thanks very much for all the interest. Good luck and blue skies to all the builders on this site.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service