Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Duplicate/Unused 701 Parts (Std Doors & Flap Controls)
I purchased the "full kit" for my 701 which came with the standard doors. I later purchased the bubble doors kit with no buyback from Zenith. I also elected to install a linear actuator to activate the flaps so the manual controls parts are also available:
7F19-1A (roll of Lexan for door windows)
7F19-2 2 (both bent door frames)
7F19-3 2 (both upper door tubes)
7F19-4 2 (both lower short door tubes)
7F19-7D 2 (both door sides)
7C3-2 Flaperon Control Lever - Powder Coated in black
7C3-3 Flap stop
SNMP-44 Control Lever Hold-Down Bungee
Other duplicates (new, unused)
7H3-2 2 Outboard Hinge Pins (welded)
7A2-4 2 Root Hinge Pins (welded)
7A2-5 2 Control Horns (using no-slot-flaps mod)
7F15-1 Panel Bottom Chanel (I went with an L-angle to mount dual throttles)
Also a large assortment of Tyco and Carling Circuit Breakers (1A, 3A, 5A, 10A, & 15A) and Toggle Switches .. send me your requirements.
I also have really nice 5.2 gal spun aluminum header tank similar to the 3.5 gal tank on the Viking site (with barrel mount straps and 6 welded hose fittings). E-mail for details.
Offering at 25% off Zenith price and I'll ship (USA .. others negotiable)
Thanks
- Attachments:
-
-
8-30-HeaderTanklInstall03.JPG, 1.2 MB
-
Replies to This Discussion
-
Permalink Reply by Kurt Satter on
-
I also have a new/unused ACS Products A-800BL04800 48" (1032) throttle cable assembly (black knob). $79.75 plus shipping @ Aircraft Spruce ... Will sell for $50 including shipping (USA).
-
Permalink Reply by Charles Plumery on
-
What is the no-slot-flaps-mod?
-
-
Details should be out on this site somewhere ... It's a modification to the flaps system that uses a pilllow block bearing thru the fuselage side rather than the half-moon slots. I have a PDF of the mod ... I'll try ataching it.
- Attachments:
-
-
No-Fuse-Slot-Flap.pdf, 141 KB
-
-
Permalink Reply by Dewayne Davenport on
-
Do you have doors for 701 for sale
-
-
I have just about all the parts to BUILD the std doors ... Listed above.
-
-
I have put lexan glass on bottom of my doors good for now Thanks
- Attachments:
-
-
image.jpeg, 1.9 MB
-
-
-
Kurt,
how much are you asking for the header tank?
Thanks,
Lonny Kirk
-
-
Lonny,
You can have the tank and any mounting materials I have for $70 and I'll pickup the UPS cost.
-
-
Kurt,
Sounds good.
my email is lkirk@jingoli.com and my cell # is 609-213-6633
Shoot me an email or give me a call and we can make arrangements. Do you have any idea what the tank weighs and what are the approximate dimensions (diameter and length).
Thanks and I look forward to hearing from you.
Lonny Kirk
-
-
Header tank SOLD ...
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
