Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Wing tip to spar and rear channel attachment
Best fit for the wing tips on my CH750 build puts the spar tip L angle and rear channel L angle (as shown on 75WX-1) about 200mm from the inside surface of the formed wing tip.
Has anyone omitted these tip supports?
Or do builders fabricate an extension for the angle to move it out from the spar tip?
Any assistance appreciated!
MWM
Replies to This Discussion
-
Permalink Reply by John Burns on
-
You may be able to put the wing tip in tighter to meet these tip supports. Mine fit in tight to the L angles after some trimming. Link to the picture Wing tip ready to install
I did not rivet the wing tip to the l angles. If you look at the Zenith factory planes they have done it both ways.
There are more details on my page. You may want to post a picture of your current fit.
-
Permalink Reply by Michael W Mallock on
-
Thanks for the reply, i did slide them in tight to the supports, but then didn't like the look or fit, at least on my build, it's good to know the factory planes are done both ways!
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
