Replies to This Discussion

Permalink Reply by joseph aloof on October 5, 2016 at 2:42pm

hey mike what would shipping be to fla   its the complete front leading edge do you know the thickness  0.25?   joe   

• ▶ Reply

Permalink Reply by Michael Haines on October 5, 2016 at 3:03pm

Joe,

I would ask that you arrange the shipping and just have the freight picked up at my location. That way you can get your best rate and once the freight is picked up the deal is done. I will have to transport it from my hangar to my plant but that is okay. I have the last shipping dimensions as 150" x 21" x 15" and a weight of 180 Lbs.

It is a full leading edge 0.025" thick formed and pre-punched with the nose rib and wingtip rivet holes and with the fuel sender access on the lower surface between nose ribs 2 and 3.

My 601 is an earlier model and the skin has changed since it was built.

Mike

• ▶ Reply

Permalink Reply by Collin Mossholder on March 11, 2023 at 11:42am

Still available?

• ▶ Reply