Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
How to remove AI line.
I need to disconnect AI line from the instrument to blow it clean. Whats the best way to do it? Thanks Andre
Replies to This Discussion
-
Permalink Reply by Bob Pustell on
-
Put some soft material on the floor and lay on your back. Be sure to have lots of light available so you can see what you are doing up there behind the panel. You can put a small table outside the door to support your legs as they stick out of the plane or you can lay with your behind in the seat area and your legs sticking up. There is not a truly comfortable way but with some thought you can make it work fairly well.
-
Permalink Reply by Andre Zeman on
-
Bob, Thank you very much. That worked well.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
