Hi,
Has anyone come up with an eloquent solution for increasing the prop clearance on a 701 with the new style fork. The fork is drilled and installed on the front gear post. Current prop clearance is 7.5 inches. Options appear to be build a spacer block with top and bottom plates matching existing curvature (about 4-9/16' CLR, if my calculations are right) or attach some side plate extensions (aluminum or steel ?)
Perry
Tags:
Have you checked the Viking website? I know they have a couple of nose fork spacers but I'm not sure if either fit the 701.
Another option would be to take the dimensions to a machine shop and have them fab one for you out of billet aluminum.
Hi Gary,
Thanks for getting back to me, it does not seem like there is a lot of people working on this for the newer fork.
I believe I am now on track with a viable solution, involving an upside down 1/4 steel key (looks like a key and acts like a key in a keyway) cut out of 3" flat bar, that fits into the 1" by 3/16" machined slot in the factory fork. By drilling an oversized hole in that plate at the new axle centre line, and then welding a piece of 3/16 plate to the back of it to get back to the right width between the forks, and finally drilling a new hole for the axle bolt through the oversized hole and the 3/16 plate. It will be held to the fork by a bolt where the original axle hole was and 1 or 2 above it probably an AN4 midway and an AN3 at the top. Moving the axle down 1.5". I get over 10" plus of tip clearance, a bit better margin of safety than 7".
I spent a day trying to machine something similar to the above out of aluminum, but it became very complicated and hard to control the result.
Pictures coming.
Thanks again,
Perry
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).