Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
installing a Ray Allen Electric Trim w 24 gauge wire
Hi,
I am installing a Ray Allen Trim Servo c/w switch and indicator. The unit comes with 24 gauge wires grrr.
I used 18-22 gauge butt and spade connectors. I transitioned from the 24 gauge to 18 using butt connectors with shrink wrap over them. Everything passes the pull test, but I am not as happy as I could be knowing the connectors are a bit oversized.
Does anyone have any aviation worthy tips on how to handle connecting these small wires and transitioning to larger gauge where necessary.
Perry
Replies to This Discussion
-
Permalink Reply by Ken Ryan
-
What I have done is to crimp D-Sub pins (male and female) to each wire end. Then join the wires together by connecting the pins, and covering with heat shrink. The result is tidy and reliable.
-
Permalink Reply by Arnie Minear
-
the quality of your crimps usually depends on the tool you use. I prefer the crimp tool that leaves a little dimple in the center of the crimp. Something like the klein 1005 crimping tool.
-
Permalink Reply by Bob Simmons
-
Permalink Reply by John Burns
-
I used the same technique as Ken Ryan. Here is a YouTube video link from Stein Air showing the process. They are also a good source for the supplies. 008: SIMPLE CONNECTION FOR AIRCRAFT TRIM WIRES
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
