Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Rotax 912 Fuel Pump - Safety AlertAnyone flying a Rotax 912 series engine should pay attention to the "Mandatory SB-912-53" service bulletin. It deals with the replacement o… Started by Bob McDonald |
3 |
May 22, 2010 Reply by Bob McDonald |
Scratch built parts needed from ZACDoes anyone know how much ZAC charges for the fuselage longerons , aluminum streamline struts and bubble doors? I fly a longwing 701, but w… Started by Jerome Shepard |
3 |
May 13, 2010 Reply by Robert Crawford |
EAA 748 Fly-In Breakfast 5-22-10 at Clearfield, PaHey all!! Just wanted everyone to know we are sponsoring an all you can eat pancake/omelet breakfast May 22 at KFIG (Clearfield, Pa.) from… Started by Dave Glass |
0 | May 10, 2010 |
Layout 750 sparHas anyone building from plans had a problem with the rivet layout and spacing where the doubler is on the spar. If so what was the correct… Started by David C Ruhe |
1 |
May 9, 2010 Reply by Ron Lendon |
750 spar rivet patternHave any plans only builders had any problems with the rivet layout for the spars on the 750. Mine don't seem to match up where the doubler… Started by David C Ruhe |
0 | May 9, 2010 |
PSRU - Crowned Pulley - A tracking solutionAfter tracking my PSRU I mentioned my ordeal to my brother-in-law. He is a stock-car fanatic. He told me that hot-rods use the same type of… Started by John Ellis |
5 |
May 5, 2010 Reply by Ron D Leclerc |
PSRU Belt TrackingSome may find the following reason enough to avoid a belt driven PSRU.I just completed the most painful part of my annual - tracking the be… Started by John Ellis |
1 |
Apr 30, 2010 Reply by Bob McDonald |
Label removalDoes anyone have a quick, easy, non-messy, environmentally friendly method of removing the annoying paper labels from the parts? I've been… Started by Steve Phillabaum |
8 |
Apr 29, 2010 Reply by Matt Archer |
Construction SequenceI am trying to rivet the wing skeleton together and notice that the construction manual, section 75-WA-1 says to deburr and rivet the skele… Started by Dr. Edward L. Olds III |
5 |
Apr 28, 2010 Reply by Dr. Edward L. Olds III |
stainley-steel together with aluminum ?On my 701, I built the horizontal stabiliser first. And now , when trialfitting it on my (not riveted yeat) fuselage ? ? ! I am missing 6 m… Started by Einar Arne Kleiven |
9 |
Apr 23, 2010 Reply by Bill Barry |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).