Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Intake flange for Marvel Schebler MA3I am building a Corvair powered Cruzer, and I just got my MA3 carb. The intake side needs a flange that I can attach a 2.5 inch scat tube… Started by Joe Pringle in Open Discussion Forums (non model specific) |
4 |
Apr 5, 2019 Reply by David Banahan |
Front Nose Gear ModAfter I installed the Desser larger 21" tundra tires on the mains I needed to raise the nose about 2". This is how I extended the fork - g… Started by Phil Smith in Open Discussion Forums (non model specific) |
4 |
Apr 5, 2019 Reply by Phil Smith |
Timing total advanceI see that WW's latest recommendation is for 26 degrees total advance. On my distributor the numbers are 600-16-2600. I believe that I w… Started by David Banahan in Corvair Engine Forum |
4 |
Apr 4, 2019 Reply by Charles Miller |
need CH601XL partsLooking for parts for a CH601XL, wings and fuselage mainly and see what else. Started by Joe Cantrill in Classified / For Sale Postings |
4 |
Apr 4, 2019 Reply by Thomas M. Pagel |
DIY main gear alu spring leafHello from Poland, Has anyone made an Alu main leaf gear? - which angle to press bend, to achieve desired angle? - which type of Alu to us… Started by Janusz Tichoniuk in Open Discussion Forums (non model specific) |
12 |
Apr 4, 2019 Reply by Charles Miller |
Fittings.... Aluminum vs SSAluminum Vs SS fittings? I wanted to go SS , but then thought about dissimilar metals. How do ya get around this with fittings? Started by David J Tillema in Open Discussion Forums (non model specific) |
4 |
Apr 4, 2019 Reply by Lawrence Bird |
For Sale - CH 750 Kit with engineI'm selling my partially complete CH 750 Kit, the tail, wings and fuselage up to the cabin are completed, I can finish out the cabin and mo… Started by Alistair Corden in Classified / For Sale Postings |
14 |
Apr 2, 2019 Reply by Alistair Corden |
New Zenith Model?I called Zenith the other day with a technical question and was having difficulty understanding Roger because of a whining noise in the bac… Started by John Austin in Open Discussion Forums (non model specific) |
3 |
Apr 2, 2019 Reply by John Austin |
Ideas on customizing the buildHey there. I owned a 601HD (that someone else built) a few years back. Now I want to build my own 750 Cruzer. As I was watching one of M… Started by Brian Krahmer in Open Discussion Forums (non model specific) |
9 |
Apr 2, 2019 Reply by John Austin |
750 Cruzer powered by Corvair?Unless I am mistaken I do not see any references to the Cruzer powered by a Corvair engine. Is this combination not compatible? Possibly n… Started by Alan Wilson in Corvair Engine Forum |
7 |
Apr 1, 2019 Reply by David Banahan |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
