Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Hardest part of the build for sale cheap...... 750 nose gear “horse collar” strut bracket.This 4130N 3/16” plate is probably the single hardest part to form on the build. I ended up making two spares as you can’t really bend a si… Started by Todd Scruton in Classified / For Sale Postings |
0 | Feb 24, 2019 |
750 Square style nose gearI’ve changed my nose gear to the newer “horse collar” type and so I have the original for sale. Never flown but well lubricated since 2009.… Started by Todd Scruton in Classified / For Sale Postings |
0 | Feb 24, 2019 |
Baggage area rivets versus anchor nuts and machine screwsI am building a Cruzer and have placed the sheet metal behind the seats with clecos. Considering future inspections and maintenance I was… Started by David Banahan in Open Discussion Forums (non model specific) |
8 |
Feb 24, 2019 Reply by Don Morrisey |
AUSFLY NarromineRoll call for attendees to Ausfly this October. I am the new Australian Zenair distributor, but unfortunately my demonstration aircraft wi… Started by James Fisher in Open Discussion Forums (non model specific) |
1 |
Feb 23, 2019 Reply by Greg Priest |
Designed and Made a walking Panel to put on FloatsStarted by Bob Jones in Open Discussion Forums (non model specific) |
3 |
Feb 23, 2019 Reply by Daniel Niendorff |
Complete Corvair engine set-up for sale2700cc Corvair engine set-up for sale. Includes CH 750 STOL engine mount, cowl and Warp Drive prop. All baffling and air box and filter. Re… Started by William A. Hungelmann in Classified / For Sale Postings |
6 |
Feb 23, 2019 Reply by Mark Schleier |
Winter snap vent installationDoes anyone have a tip on installing the snap vents while it's cold. I have considered heating with a heat gun, heating in an oven to 125… Started by David Banahan in Open Discussion Forums (non model specific) |
2 |
Feb 23, 2019 Reply by Richard Carson |
Rudder and stabilizer hinge bracketsI bought some hinge material from a local metal supplier But the aluminum angle does not have a radius on the inside corner of the angle.… Started by Michael T. in Open Discussion Forums (non model specific) |
9 |
Feb 23, 2019 Reply by Jeff Bailey |
engine test bed planHello folks, I am looking for DIY plans for Engine Test Bed or Dynamo for me so I can excerise run my engine while I am building, it's taki… Started by Kenneth Buchmann in Open Discussion Forums (non model specific) |
4 |
Feb 22, 2019 Reply by John Austin |
Prop demension and selectionI would like to use a three blade Warp Drive propeller on my O-235. What size(s) are practical for the 601? Are there other viable options… Started by Mike Holder in Lycoming Engines |
14 |
Feb 21, 2019 Reply by Daniel Booker |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
