Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
ACS KEYED IGNITION SWITCH WITH START POSITION A-510-2 PriceThought I would give a heads up to those that are getting ready to buy the key switch. I am working on my instrument panel on my 750 and… Started by Steven Ward in Open Discussion Forums (non model specific) |
2 |
Jan 10, 2019 Reply by Steven Ward |
ADSB like you've never seen it !!!https://www.youtube.com/watch?v=JuATn7RuC2A Bumped into this you might want to watch ttfn Phil Started by Phil Smith in Open Discussion Forums (non model specific) |
10 |
Jan 8, 2019 Reply by christopher fryatt |
Zenith CH 701 For Sale $16,500 (More Price Reduction) SOLD, SOLD, SOLDIf interested, look on Barnstormers for my Ad. The airplane is located in Burnet, Tx. I live close by in Austin. It has 34 hours on Phas… Started by Cliff Stripling in Classified / For Sale Postings |
7 |
Jan 8, 2019 Reply by Cliff Stripling |
Cable tension?We are doing the annual on our 750 and can’t find anywhere in the plans, the proper tension or slack for the rudder and elevator cables. an… Started by Andy Graham in Open Discussion Forums (non model specific) |
1 |
Jan 7, 2019 Reply by John Austin |
Jabiru CoilsReading a post in the 601 forum, it refers to fitting an insulating washer under the ignition coils to reduce heat transfer. It seems to b… Started by Tim Juhl in Open Discussion Forums (non model specific) |
7 |
Jan 6, 2019 Reply by Tim Croy |
Glide ratio: Zenith CH 750 CruzerToday I was out doing my 40hr phase flying and decided to do some idle power glide tests. Zenith recommends 60kts best glide speed. I tried… Started by William McClain in Open Discussion Forums (non model specific) |
3 |
Jan 6, 2019 Reply by R Michael Moore |
701 Ring mount water pump outlet clearanceJust uncreated my new 912 and installed the ring mount, but the lower left water pump elbow sits too close to one of the ring mount bracket… Started by Jim and Amelia Isaacs in Rotax Engine Forum |
14 |
Jan 6, 2019 Reply by Jim and Amelia Isaacs |
Pitot tube placementCan not find in 801 plans where the hole for the pitot tube should be drilled. Any body point me in right place. Thanks, Bill Started by William D. Phillips in Open Discussion Forums (non model specific) |
2 |
Jan 5, 2019 Reply by François Balaux |
Slick Magneto Service Bulletin SB1-15ALooks like the distributor gear on many Slick Magnetos needs to be replaced. This affects mine...check your serial numbers... slick%20SB1… Started by Don Morrisey in Continental Engines |
6 |
Jan 5, 2019 Reply by brad cohen |
Got My Warp Drive Service Bulletin Hub and Props Back from WDI really appreciate Daryl at Warp Drive. He has always been responsive and good for his word. I had a two-year-old "HP" hub and 3 bladed p… Started by Gary Welch in Open Discussion Forums (non model specific) |
2 |
Jan 5, 2019 Reply by Joe Spencer |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
