701 Floats for the 750 - Zenith Aircraft Builders and Flyers2024-03-28T12:55:42Zhttps://zenith.aero/forum/topics/701-floats-for-the-750?commentId=2606393%3AComment%3A705386&x=1&feed=yes&xn_auth=noHi Buz
I am planning to add…tag:zenith.aero,2020-01-08:2606393:Comment:7053862020-01-08T15:50:27.752ZThomas Heitinghttps://zenith.aero/profile/ThomasHeiting
<p>Hi Buz </p>
<p>I am planning to add the 3 wheel floats like yours to my 701.</p>
<p>Can you give me the total height at the rudder top with your floats on pavement?</p>
<p>Thanks Much!</p>
<p>Tom Heiting</p>
<p>Hi Buz </p>
<p>I am planning to add the 3 wheel floats like yours to my 701.</p>
<p>Can you give me the total height at the rudder top with your floats on pavement?</p>
<p>Thanks Much!</p>
<p>Tom Heiting</p> Hi Bob,
I have a CH 701 and 1…tag:zenith.aero,2019-06-05:2606393:Comment:6790912019-06-05T03:10:42.312ZRon Simonsenhttps://zenith.aero/profile/ronaldsimonsen
<p>Hi Bob,</p>
<p>I have a CH 701 and 1150 amphibious floats ready to install. I just need to come up with a starting point</p>
<p>My fire wall forward is 230 lbs. I have the drawings Fl-113and 7-G-3. Would you have a filled out W/B sheet or photos of attach points and aft CG from spar <a href="https://storage.ning.com/topology/rest/1.0/file/get/2768574643?profile=original" target="_blank" rel="noopener">attached point.</a></p>
<p>REGARDS, Ron Simonsen </p>
<p></p>
<p>Hi Bob,</p>
<p>I have a CH 701 and 1150 amphibious floats ready to install. I just need to come up with a starting point</p>
<p>My fire wall forward is 230 lbs. I have the drawings Fl-113and 7-G-3. Would you have a filled out W/B sheet or photos of attach points and aft CG from spar <a href="https://storage.ning.com/topology/rest/1.0/file/get/2768574643?profile=original" target="_blank" rel="noopener">attached point.</a></p>
<p>REGARDS, Ron Simonsen </p>
<p></p> Sorry Terry - all the logs, m…tag:zenith.aero,2017-06-02:2606393:Comment:5707592017-06-02T13:47:00.221Zbuz heuchanhttps://zenith.aero/profile/buzheuchan
<p>Sorry Terry - all the logs, manuals, etc went with the plane</p>
<p>Sorry Terry - all the logs, manuals, etc went with the plane</p> Hey Buzz, very pretty! Do you…tag:zenith.aero,2017-06-02:2606393:Comment:5706162017-06-02T05:04:48.873Zterry w. thayerhttps://zenith.aero/profile/terrywthayer
<p>Hey Buzz, very pretty! Do you have the owners manual or installation manual? Or does anyone out there have manuals or know where to get one? I have the same floats but can't find a manual.</p>
<p>Thanks, Terry</p>
<p></p>
<p>Hey Buzz, very pretty! Do you have the owners manual or installation manual? Or does anyone out there have manuals or know where to get one? I have the same floats but can't find a manual.</p>
<p>Thanks, Terry</p>
<p></p> Of course all things are adap…tag:zenith.aero,2017-05-28:2606393:Comment:5697162017-05-28T20:55:12.204ZBob Joneshttps://zenith.aero/profile/BobJones
<p>Of course all things are adaptable , but if they are the 13'-2" floats they may be a little under floated, I like the flat spring mount you have , it is more into ground effect and gets off shorter then the Newer style gear leg mounts, if the floats you have are 15'-5' long then you have the 1150 amphibs.or if you seal off the wheel holes and remove the gear you would end up with about 1250- 1300 floation per float , which would work well up to about 1500 gross, it appears to me that you are…</p>
<p>Of course all things are adaptable , but if they are the 13'-2" floats they may be a little under floated, I like the flat spring mount you have , it is more into ground effect and gets off shorter then the Newer style gear leg mounts, if the floats you have are 15'-5' long then you have the 1150 amphibs.or if you seal off the wheel holes and remove the gear you would end up with about 1250- 1300 floation per float , which would work well up to about 1500 gross, it appears to me that you are set at 6.5-7.0 incidence , I have the custom spacers left over from my first 701 which reduces the angle to apx.3.5 degrees if you would like , it makes the 701 faster but still gets off very short as in my float video, good luck with your project ...BOB </p>