Factory "B" 601XL-B Mod Kit Installation (??) - Zenith Aircraft Builders and Flyers2024-03-28T08:47:52Zhttps://zenith.aero/forum/topics/factory-replacement-kit-installation?feed=yes&xn_auth=noIt was around 100 hours for m…tag:zenith.aero,2022-06-13:2606393:Comment:8714752022-06-13T14:41:00.602ZDavid Gallagherhttps://zenith.aero/profile/DavidGallagher
<p>It was around 100 hours for me working alone.</p>
<p></p>
<p>Dave G.</p>
<p>It was around 100 hours for me working alone.</p>
<p></p>
<p>Dave G.</p> You should be able to find a…tag:zenith.aero,2022-06-01:2606393:Comment:8704452022-06-01T19:57:51.562ZBob Simmonshttps://zenith.aero/profile/BobSimmons
<p>You should be able to find a pin punch in the necessary size at your local hardware/home improvement store.</p>
<p>You should be able to find a pin punch in the necessary size at your local hardware/home improvement store.</p> I didn't track my hours and t…tag:zenith.aero,2022-06-01:2606393:Comment:8705992022-06-01T12:31:45.812ZDouglas Binderhttps://zenith.aero/profile/DouglasBinder
<p>I didn't track my hours and the center spar was already done. I was told 100 hours but I think it was maybe half that. You are going to remove ~1000 rivets. Get some automatic center punches and turn the tip into a straight sided punch to punch out the rivet stem. Makes drilling out the rivets much easier.</p>
<p>I didn't track my hours and the center spar was already done. I was told 100 hours but I think it was maybe half that. You are going to remove ~1000 rivets. Get some automatic center punches and turn the tip into a straight sided punch to punch out the rivet stem. Makes drilling out the rivets much easier.</p> I'd be concerned over whether…tag:zenith.aero,2022-05-31:2606393:Comment:8706492022-05-31T20:10:02.826ZBob Simmonshttps://zenith.aero/profile/BobSimmons
<p>I'd be concerned over whether the engine was pickled or not. Should probably talk to these guys since they're the US Jabiru engine distributors:</p>
<p></p>
<p><a href="http://www.flylightning.net/" target="_blank">http://www.flylightning.net/</a></p>
<p>I'd be concerned over whether the engine was pickled or not. Should probably talk to these guys since they're the US Jabiru engine distributors:</p>
<p></p>
<p><a href="http://www.flylightning.net/" target="_blank">http://www.flylightning.net/</a></p>