Ivoprop - Zenith Aircraft Builders and Flyers2024-03-29T15:54:41Zhttps://zenith.aero/forum/topics/ivoprop-1?xg_source=activity&feed=yes&xn_auth=noThanks again for your comment…tag:zenith.aero,2023-01-14:2606393:Comment:8890762023-01-14T23:02:15.236ZAndrew Rauerthttps://zenith.aero/profile/AndrewRauert
Thanks again for your comments and information I will definitely check out Rotax’s recommendations!
Thanks again for your comments and information I will definitely check out Rotax’s recommendations! Check the MMI of any prop bef…tag:zenith.aero,2023-01-14:2606393:Comment:8890722023-01-14T22:30:29.565ZJim and Amelia Isaacshttps://zenith.aero/profile/JimIsaacs
<p>Check the MMI of any prop before purchasing. Rotax specifies a min and max for the 912 and some props do not meet this requirement.</p>
<p>Check the MMI of any prop before purchasing. Rotax specifies a min and max for the 912 and some props do not meet this requirement.</p> My buddy Kyle Woodfill hangar…tag:zenith.aero,2023-01-14:2606393:Comment:8890682023-01-14T18:24:08.544ZJimmy Younghttps://zenith.aero/profile/JimmyYoung
<p>My buddy Kyle Woodfill hangars right next to me, he has a new 701 w/912 ULS spinning a 70” 3 blade taper tip stainless leading edge Warp Dirve prop. It works great. </p>
<p>My buddy Kyle Woodfill hangars right next to me, he has a new 701 w/912 ULS spinning a 70” 3 blade taper tip stainless leading edge Warp Dirve prop. It works great. </p> Thanks for your response. I w…tag:zenith.aero,2023-01-14:2606393:Comment:8889262023-01-14T16:01:26.307ZAndrew Rauerthttps://zenith.aero/profile/AndrewRauert
Thanks for your response. I was also considering the warp drive. What size did you use for the 912?
Thanks for your response. I was also considering the warp drive. What size did you use for the 912? Andrew, I’ve owned both an IV…tag:zenith.aero,2023-01-13:2606393:Comment:8888172023-01-13T10:32:29.818ZJimmy Younghttps://zenith.aero/profile/JimmyYoung
<p>Andrew, I’ve owned both an IVO prop on a Rotax 503 and a Warp Drive 3 blade on a Rotax UL 80 hp in the past, both on Kolb aircraft.. In my opinion, the Warp Drive is a much better prop for the 912. Very tough, easy to adjust, and reasonably priced.</p>
<p>Andrew, I’ve owned both an IVO prop on a Rotax 503 and a Warp Drive 3 blade on a Rotax UL 80 hp in the past, both on Kolb aircraft.. In my opinion, the Warp Drive is a much better prop for the 912. Very tough, easy to adjust, and reasonably priced.</p>