Rotax’s service bulletin on carburettor - Zenith Aircraft Builders and Flyers2024-03-28T10:43:41Zhttps://zenith.aero/forum/topics/rotax-s-service-bulletin-on-carburettor?commentId=2606393%3AComment%3A784902&feed=yes&xn_auth=noFound this hope it helps tag:zenith.aero,2020-12-12:2606393:Comment:7905372020-12-12T22:07:24.864ZChris Hoarehttps://zenith.aero/profile/ChrisHoare
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8280468498?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8280468498?profile=RESIZE_710x" class="align-full"/></a>Found this hope it helps </p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8280468498?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8280468498?profile=RESIZE_710x" class="align-full"/></a>Found this hope it helps </p> I have been advised to give e…tag:zenith.aero,2020-12-11:2606393:Comment:7900062020-12-11T10:33:13.290ZChris Hoarehttps://zenith.aero/profile/ChrisHoare
<p>I have been advised to give engine number to Rotax and they should cover replacement parts.</p>
<p>here in Australia will find out next week for sure.</p>
<p>I have been advised to give engine number to Rotax and they should cover replacement parts.</p>
<p>here in Australia will find out next week for sure.</p> Servus! tag:zenith.aero,2020-12-10:2606393:Comment:7897032020-12-10T18:39:09.052ZJim and Amelia Isaacshttps://zenith.aero/profile/JimIsaacs
<p>Servus! </p>
<p>Servus! </p> Hi Jim, right on the spot. Th…tag:zenith.aero,2020-12-10:2606393:Comment:7897802020-12-10T18:22:22.896ZMichel Rufhttps://zenith.aero/profile/MichelRuf
<p>Hi Jim, right on the spot. Thanks a lot.</p>
<p>Michel</p>
<p>Hi Jim, right on the spot. Thanks a lot.</p>
<p>Michel</p> Hi Michel,
It appears your tw…tag:zenith.aero,2020-12-10:2606393:Comment:7891952020-12-10T00:46:00.581ZJim and Amelia Isaacshttps://zenith.aero/profile/JimIsaacs
<p>Hi Michel,</p>
<p>It appears your two dot floats must be replaced with the new floats marked with an “R”, please read this: <a href="https://www.rotax-owner.com/en/rotax-blog/item/71-rotax-carb-floats-id-guide" target="_blank">https://www.rotax-owner.com/en/rotax-blog/item/71-rotax-carb-floats-id-guide</a> </p>
<p>Jim</p>
<p>Hi Michel,</p>
<p>It appears your two dot floats must be replaced with the new floats marked with an “R”, please read this: <a href="https://www.rotax-owner.com/en/rotax-blog/item/71-rotax-carb-floats-id-guide" target="_blank">https://www.rotax-owner.com/en/rotax-blog/item/71-rotax-carb-floats-id-guide</a> </p>
<p>Jim</p> My engine is not in the seria…tag:zenith.aero,2020-12-07:2606393:Comment:7874032020-12-07T10:31:30.147ZMichel Rufhttps://zenith.aero/profile/MichelRuf
<p>My engine is not in the serial no. list. But I had to exchange the floats with SB-912-067. The new floats were marked with 2 dots. Does anyone know if this SB applies to me because I have no clue what part no. the floats with the dots have?</p>
<p>My engine is not in the serial no. list. But I had to exchange the floats with SB-912-067. The new floats were marked with 2 dots. Does anyone know if this SB applies to me because I have no clue what part no. the floats with the dots have?</p> I know how you feel think it…tag:zenith.aero,2020-12-04:2606393:Comment:7850322020-12-04T02:12:52.422ZChris Hoarehttps://zenith.aero/profile/ChrisHoare
<p>I know how you feel think it should be at there expense if they can’t get it right starting to get fed up with it .</p>
<p>I know how you feel think it should be at there expense if they can’t get it right starting to get fed up with it .</p> Wait, the floats I bought las…tag:zenith.aero,2020-12-03:2606393:Comment:7849022020-12-03T23:23:45.323ZPaul Sandershttps://zenith.aero/profile/ukpylot
<p>Wait, the floats I bought last year were absolutely the last redesign, never going to leak etc etc!! Makes me wonder how good the rest of my engine is when they can't make something as simple as these things.</p>
<p></p>
<p>I suppose its possible that the "new" floats are actually the ones I already have, otherwise I'll be on my third replacement in just two years, pretty crappy.</p>
<p>Wait, the floats I bought last year were absolutely the last redesign, never going to leak etc etc!! Makes me wonder how good the rest of my engine is when they can't make something as simple as these things.</p>
<p></p>
<p>I suppose its possible that the "new" floats are actually the ones I already have, otherwise I'll be on my third replacement in just two years, pretty crappy.</p>