Thoughts on Steel Corosion Prevention - Zenith Aircraft Builders and Flyers2024-03-29T14:49:40Zhttps://zenith.aero/forum/topics/thoughts-on-steel-corosion-prevention?feed=yes&xn_auth=noDan - Look into the POR15 pro…tag:zenith.aero,2021-07-06:2606393:Comment:8413382021-07-06T04:24:39.859ZBob Widmerhttps://zenith.aero/profile/BobWidmer
<p>Dan - Look into the POR15 products. - I use it on those aluminum parts that are riveted together instead of Cortec. First I wipe the aluminum down with Acetone, then scrub lightly with a fine Scotch Bright, then wipe again with Acetone. For those parts that are not in contact with each other I use the Acetone/Scotch Bright/Acetone method then Pro Form Self Etching Primer #PF654</p>
<p>Dan - Look into the POR15 products. - I use it on those aluminum parts that are riveted together instead of Cortec. First I wipe the aluminum down with Acetone, then scrub lightly with a fine Scotch Bright, then wipe again with Acetone. For those parts that are not in contact with each other I use the Acetone/Scotch Bright/Acetone method then Pro Form Self Etching Primer #PF654</p> Thanks Jim and Amelia - Good…tag:zenith.aero,2021-06-29:2606393:Comment:8409182021-06-29T12:36:14.419ZDan Broomhttps://zenith.aero/profile/DanBroom
<p>Thanks Jim and Amelia - Good to consider!</p>
<p>Thanks Jim and Amelia - Good to consider!</p> Excepting the galvanized fire…tag:zenith.aero,2021-06-12:2606393:Comment:8384442021-06-12T09:10:05.163ZJim and Amelia Isaacshttps://zenith.aero/profile/JimIsaacs
<p>Excepting the galvanized firewall, I painted my aircraft including all the steel with Stewart Systems, it’s holding up well. If you are building a strut braced Zenith, coat the inside of the struts with some sort of liquid that will delay the onset of rust before you final assemble them, and do not seal the ends, that lift strut tubing is open to the atmosphere for a reason.</p>
<p>Excepting the galvanized firewall, I painted my aircraft including all the steel with Stewart Systems, it’s holding up well. If you are building a strut braced Zenith, coat the inside of the struts with some sort of liquid that will delay the onset of rust before you final assemble them, and do not seal the ends, that lift strut tubing is open to the atmosphere for a reason.</p> Thanks for all the insights -…tag:zenith.aero,2021-06-10:2606393:Comment:8382242021-06-10T17:38:30.182ZDan Broomhttps://zenith.aero/profile/DanBroom
<p>Thanks for all the insights - good to know the options and the opportunity of trying something different (powdercoating) is tempting!</p>
<p></p>
<p>Thanks for all the insights - good to know the options and the opportunity of trying something different (powdercoating) is tempting!</p>
<p></p> Like Dan, I powder coated a l…tag:zenith.aero,2021-06-03:2606393:Comment:8377142021-06-03T01:54:55.869ZJohn Austinhttps://zenith.aero/profile/JohnLAustin
<p>Like Dan, I powder coated a lot of parts myself. Eastwood sells a reasonably priced kit and I converted a cheap "scratch and dent" toaster oven to use in my shop for small items. My brother is a builder and gave me a kitchen oven for free that he salvaged from a kitchen remodel and I use it for larger parts. I powder coated all the high wear items such as rudder pedals, dual sticks, etc. and epoxy primer/topcoated the remainder including the engine mount. Some builders powder coat their…</p>
<p>Like Dan, I powder coated a lot of parts myself. Eastwood sells a reasonably priced kit and I converted a cheap "scratch and dent" toaster oven to use in my shop for small items. My brother is a builder and gave me a kitchen oven for free that he salvaged from a kitchen remodel and I use it for larger parts. I powder coated all the high wear items such as rudder pedals, dual sticks, etc. and epoxy primer/topcoated the remainder including the engine mount. Some builders powder coat their engine mounts, but supposedly if you get a cracked weld in an engine mount, the powder coat might not crack and reveal the cracked weld underneath, so paint is recommended instead since it invariably cracks right along with the substrate. Also, better to use light colors on the mount so a crack would be more easily seen.</p>
<p>John</p>
<p>N750A</p> I powder coat. It’s not hard…tag:zenith.aero,2021-06-01:2606393:Comment:8374282021-06-01T20:54:57.561ZDaniel Niendorffhttps://zenith.aero/profile/DanielNiendorff
<p>I powder coat. It’s not hard to do yourself. They equipment and powder is not expensive (in airplane terms at least). All you need to find is an old oven on Craigslist and you can do most parts. Big stuff you can have done by the pros and I’ve found it’s fairly reasonable. I do my own mostly for the convenience factor......</p>
<p>I powder coat. It’s not hard to do yourself. They equipment and powder is not expensive (in airplane terms at least). All you need to find is an old oven on Craigslist and you can do most parts. Big stuff you can have done by the pros and I’ve found it’s fairly reasonable. I do my own mostly for the convenience factor......</p> I used a 2 part epoxy primer…tag:zenith.aero,2021-06-01:2606393:Comment:8376752021-06-01T19:10:34.456ZOrlandohttps://zenith.aero/profile/Orlando
<p>I used a 2 part <a href="https://www.eastwood.com/eastwood-epoxy-white-primer-and-catalyst-kit-quart.html" target="_blank" rel="noopener">epoxy primer</a> and urethane auto paint on all my steel parts and it has held up well on parts that I don't interact with.</p>
<p></p>
<p>If I could do it over I would have powder coated the rudder pedals, control stick and wing step in my 650. After a year the paint is starting to wear and show surface rust.</p>
<p>I used a 2 part <a href="https://www.eastwood.com/eastwood-epoxy-white-primer-and-catalyst-kit-quart.html" target="_blank" rel="noopener">epoxy primer</a> and urethane auto paint on all my steel parts and it has held up well on parts that I don't interact with.</p>
<p></p>
<p>If I could do it over I would have powder coated the rudder pedals, control stick and wing step in my 650. After a year the paint is starting to wear and show surface rust.</p>