My build while slow is continuing. I have moved the fuselage and related subassemblies to the airport. I hope to fly in September. The location of the timing gage is in a difficult location to see. Would it be acceptable to create a new gage on the side of the alternator mounting bracket? I would then place a timing mark with paint. This is with the #1 cylinder at TDC.
How are you and Edie doing? Thank you for your help earlier in my build process. I am flying now and adjusting the prop for the best compromise between cruise and climb.
David Banahan
Thanks for looking. I put up version 3.4 after input from others and believe I'm good to go. I have been relying on Dan at SPA.
Dec 21, 2017
David Banahan
Hi Harold and Edy,
My build while slow is continuing. I have moved the fuselage and related subassemblies to the airport. I hope to fly in September. The location of the timing gage is in a difficult location to see. Would it be acceptable to create a new gage on the side of the alternator mounting bracket? I would then place a timing mark with paint. This is with the #1 cylinder at TDC.
Thanks for your opinion.
David
May 17, 2018
David Banahan
Hi Harold,
How are you and Edie doing? Thank you for your help earlier in my build process. I am flying now and adjusting the prop for the best compromise between cruise and climb.
God bless,
David
Jul 20, 2020