Zenith 750 Cruzer, Fit the instrument panel
June 30, 2025Fabricated the aluminum strips to hold the fine fuel filter.Fit the instrument panel face to the size.…See More
Zenith Aircraft Builders and Flyers
"thirty hrs on major overhaul; replaced cracked exhaust, replaced faulty fuel pressure gauge/sender"
Six inch wheels on 750 Cruzer
Is it possible (easy) to put the six inch wheels for from the 750 STOL on the Cruzer? What components would I need to order instead of the standard Cruzer landing gear, wheels and brakes? In addition…See More
Let's go flying: Zenith CH 650 light sport aircraft
Zenith Aircraft's Roger Dubbert took Anna Raines flying in the low-wing Zenith CH 650 to discuss aeronautical engineering, learning to fly, and more, all whi...
Zenith 750 Cruzer, Air outlet in the air ram box
June 28, 2025Finished cutting the air ram box.Drilled a 1 in hole and riveted an air outlet.…See More
Cruzer POH with Aeromomentum engine?
I am looking for a draft POH for my CH750 Cruzer with an Aeromomentum engine. Does anyone have one I could use as a starting point to make my own?See More
compression level of puck system on CH-601 w/ Continental O-235
How far should the rudder pedal attachment bar rise up off of the lower bearing block when the airplane is resting on the gear? I'm trying to adjust the compression clamps. The instructions say…See More
Zenith 750 Cruzer, Cutting the air ram box
June 12, 2025Cutting the air ram box.The box is built from a think aluminum. Tried shears, an angle grinder, a hack saw. The best is a jig saw. Clean and straight cut.…See More
Proposed battery change
Hi, I was thinking recently of replacing the lead/acid battery with a LIFePO battery as a means of saving weight, my engine is a continental 0-200A with the early alternator and external…See More
