Building and Flying Info / Your Profession / Other Background Info
Retired from K12 Ed and then worked for 10 years for STI, a K12 software provider located in Mobile, AL. Retired again and have enjoyed my time building and flying the Zenith 701. Building my second 701 just to have something to do.
I'm in Elmore AL (between Wetumpka and Prattville) and am about to pull the trigger on a 801. I was hoping for a 701, but this one has sort of fell into my lap.
Anyway, I'd be interested in gleaning from you. I'm in the Anniston area alot as I work for Alabama EMA and am in the area quite often. Are you willing to share your knowledge, insights, heartbreaks, triumphs, mistakes, fixes?
I sent you and email at your cableone.net address. I don't know if that's still valid since the email I read was from a 2009 Matronics list post. Here's my question:
Tommy,
I found a 2009 email from you on Matronics list noting that you had a Czech built muffler for a 601. I have a Zenith CH701 with the Czech built muffler system. I don’t know if the 601 exhaust is the same as the 701 or if by any chance you still have it laying around 12 years later, but if you do, I’m interested in it. I suppose it would be too much to dream that you might have the header pipes that go from the 912 cylinders to the muffler? My header pipe for #3 cylinder broke at the weld and #4 has a crack just waiting to break. Tried a welding repair, but no joy so far. In any case, if you’re still out there, I’d appreciate hearing back.
My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.
Randy Branson
Hello Tommy,
I'm in Elmore AL (between Wetumpka and Prattville) and am about to pull the trigger on a 801. I was hoping for a 701, but this one has sort of fell into my lap.
Anyway, I'd be interested in gleaning from you. I'm in the Anniston area alot as I work for Alabama EMA and am in the area quite often. Are you willing to share your knowledge, insights, heartbreaks, triumphs, mistakes, fixes?
Thanks and great flying!
Oct 8, 2012
Jeff Beachy
Hi Tommy,
I sent you and email at your cableone.net address. I don't know if that's still valid since the email I read was from a 2009 Matronics list post. Here's my question:
Tommy,
I found a 2009 email from you on Matronics list noting that you had a Czech built muffler for a 601. I have a Zenith CH701 with the Czech built muffler system. I don’t know if the 601 exhaust is the same as the 701 or if by any chance you still have it laying around 12 years later, but if you do, I’m interested in it. I suppose it would be too much to dream that you might have the header pipes that go from the 912 cylinders to the muffler? My header pipe for #3 cylinder broke at the weld and #4 has a crack just waiting to break. Tried a welding repair, but no joy so far. In any case, if you’re still out there, I’d appreciate hearing back.
Thanks!
Jeff Beachy
N701N
jeffbeachy@gmail.com
Jan 22, 2021
Michael Mccarthy
Hello,
My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.
Michael Mccarthy.
Jun 18, 2021