Andre Levesque's Videos (Zenith Aircraft Builders and Flyers) - Zenith Aircraft Builders and Flyers2024-05-04T19:08:49Zhttps://zenith.aero/video/video/listForContributor?screenName=24geo3od3hvt7&rss=yes&xn_auth=noch750 Slat rib cnc worktag:zenith.aero,2014-11-11:2606393:Video:3917472014-11-11T22:15:06.151ZAndre Levesquehttps://zenith.aero/profile/AndreLevesque
<a href="https://zenith.aero/video/ch750-slat-rib-cnc-work"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180858822?profile=original&width=240&height=180" width="240" height="180" alt="Thumbnail" /><br />
</a><br />Here is the way I cut all the 016 6061T6 aluminum for the slat ribs for my CH750. I didn't need the cutout blocks at all. The precision of the cnc plasma cuts were dead on. Just deburred a bit and went right on forming the ribs.
<a href="https://zenith.aero/video/ch750-slat-rib-cnc-work"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180858822?profile=original&width=240&height=180" width="240" height="180" alt="Thumbnail" /><br />
</a><br />Here is the way I cut all the 016 6061T6 aluminum for the slat ribs for my CH750. I didn't need the cutout blocks at all. The precision of the cnc plasma cuts were dead on. Just deburred a bit and went right on forming the ribs. New tool in the Shoptag:zenith.aero,2011-05-05:2606393:Video:1196832011-05-05T22:48:05.508ZAndre Levesquehttps://zenith.aero/profile/AndreLevesque
<a href="https://zenith.aero/video/new-tool-in-the-shop"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180840612?profile=original&width=240&height=180" width="240" height="180" alt="Thumbnail" /><br />
</a><br />Short video of my newly acquired CNC plasma cutter.
<a href="https://zenith.aero/video/new-tool-in-the-shop"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180840612?profile=original&width=240&height=180" width="240" height="180" alt="Thumbnail" /><br />
</a><br />Short video of my newly acquired CNC plasma cutter.