Label removal

Does anyone have a quick, easy, non-messy, environmentally friendly method of removing the annoying paper labels from the parts? I've been useing a heat gun to loosen up the glue and MEK to remove the glue from the aluminum part. Acetone doesn't seem to cut the glue very well, WD-40 leaves a mess and goo-gone is ineffective.

Views: 251

▶ Reply to This

Replies to This Discussion

Permalink Reply by Steve Phillabaum on March 30, 2009 at 2:19pm
Richard:
Thanks for the tip.
Steve
Permalink Reply by Richard Rost on March 29, 2009 at 7:34pm
I've had no trouble with the Acetone. But I keep thinking if the aircraft is half as good as the glue I'm in great shape.
Permalink Reply by Rodney Rix on March 30, 2009 at 2:11pm
Rubbing alcohol works good. Put a couple drops on the label and let it soak and it will peal right off . A little on a rag will wipe the glue off easily also.
Permalink Reply by Clemens Kramer on April 24, 2009 at 6:40am
good ole gasoline works also
Permalink Reply by Phillip Owens on April 27, 2010 at 12:54pm
I have used laquer thinner to remove all of the labels withour any problems it also helps remove the markings from the aluminum. I have a plastic bottle with a thin spout, I spray a small amount of thinner on the label and let it soak thru the paper then peel it off and clean any remaining glue with a rag and small amount of thinner. No problemo!!!!
Permalink Reply by Mike Armstead on April 27, 2010 at 9:57pm
Acetone works great. Wet the label and let it set a few seconds. It will then come off pretty easy with your fingernail.
Permalink Reply by Matt Archer on April 29, 2010 at 3:14pm
I use a heat gun (hair blower type). It usually comes off in one piece. But be careful the AL gets hot

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service