Replies to This Discussion

Permalink Reply by Dan Dempsey on January 10, 2012 at 5:06pm

I'm using one with female NPT.  Then I have AN-6 Ls that thread into these.  Mine is a 5 way since I'm doing the optional long range tanks.

http://daniel.dempseyfamily.us/zodiac/fuel/fuellines.htm

 

Aircraft Spruce has them with male fittings.

http://www.aircraftspruce.com/catalog/eppages/fs20tYPE4.php

Dan Dempsey

• ▶ Reply

Permalink Reply by Dr. Edward L. Olds III on January 11, 2012 at 9:26pm

Dan,

Thanks for the help.  I have to talk to a "product specialist" at Aircraft Spruce, they tell me.  I think it will work.

Ed

• ▶ Reply

Permalink Reply by John Austin on January 10, 2012 at 5:59pm

Ed,

If you go to Andair's website, they have an interactive site that lets you configure the selector exactly the way you want it! I "think" the prices are a little better than Spruce's. If you are in no big hurry and attend one of the "big events", I know they sell at AirVenture (don't know about Sun 'n Fun) and they'll give you even better prices and free shippng! They have an inexpensive option to get the mounting holes countersunk (they even supply the correct screws) - saves skinned knuckles when switching tanks!

Regards,

John

• ▶ Reply

Permalink Reply by Dr. Edward L. Olds III on January 11, 2012 at 9:27pm

John,

Thanks again, I can't wait, I'm ready to plumb.  I put on the horizontal stabilizer today!  Also finished the forward top skin, pretty much.

Ed

• ▶ Reply