Pitot tube placement

Can not find in 801 plans where the hole for the pitot tube should be drilled. Any body point me in right place. Thanks, Bill 

Views: 491

▶ Reply to This

Replies to This Discussion

Permalink Reply by David J. Beaulieu on January 5, 2019 at 7:02pm

Suggest calling Zenith and/or posting in the 801 section of the forum.  Though, there is not much activity in that particular section relative to everything else here.  Good luck, wish I would have started with an 801!!

Permalink Reply by François Balaux on January 5, 2019 at 7:37pm

Hi

You should have a look at 8ZV-1.

http://www.zenithair.net/wp-content/uploads/ch801/data/8ZV-01.pdf

Regards,

Francois

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Flying Knuckleheads

Lavion Aero

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2026   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service