Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
350i Can Bus outputs
I am at the stage of wiring up my panel etc, have the Dynon Skyview system with the EMS 221 module, I intend to use the Can Bus for the main engine sensors. Does anybody know if there is an alternator current output on the Can Bus or would I have to fit a separate shunt and feed that into the EMS?
Replies to This Discussion
-
Permalink Reply by David Hall on
-
I am doing the same, using an EMS 221 module to take advantage of the Can bus, and to avoid installing extra sensors. UL350i in a Cruzer, still in construction stage.
I have a list of all the extra items that CANBUS provides, and it does not include alternator input, so I have installed a shunt to feed the alternator output into the EMS.
Attached is the list I received from Dynon showing all the ouputs that the CANBUS does provide if the EMS221 is used instead of the EMS220
- Attachments:
-
-
Can Bus output.pdf, 22 KB
-
-
Permalink Reply by Michael Shewan on
-
Thanks David.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
