I just replaced both my carb flange assemblies on my 912ULS. 

I started to notice it was starting slower than usual and the idle was off from its normal smooth self but acceptable.  My run ups were good and in the air performance was good.

What prompted me to look further into the symptoms was my last landing the engine died as I was turning for a back taxi to exit the runway. My first thought was my idle was to slow but the engine had never quit on me. 

I took my cowling off and adjusted the idle, but it just didn't seem right. I then wiggled both carbs and found the problem. My right carb flange was cracked about half way around and the left carb flange was starting to crack. 

I have had the engine for 4.5 years and the engine has been running for 3.5 years since my first flight.  I had 330 hours on the engine and plane. With both flanges replaced the engine is performing like it should.

Jim

CH 701

Views: 30

Reply to This

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service