Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Rotax 912 ULS Installed WeightA friend of ours is about to install a Rotax 912 ULS in his Zenith CH750 STOL. The firewall forward kit is the standard package from Zenith… Started by Oliver Reik |
12 |
Feb 12 Reply by Guy Magnuson |
912is return lineHas anyone had experience with installing a 912is in a CH 650. There is an excellent video by Sky Tech and Rotax for installing the 912is… Started by Guy Magnuson |
9 |
Feb 8 Reply by Eric Genzlinger |
Senenich C70MY low inertia Propeller bladesI am looking to replace my Warp Drive propeller blades with low inertia Senenich C70MY blades (low inertia foam core blades designed to fit… Started by Mark Bengel |
4 |
Jan 4 Reply by Shawn Magin |
Carburators overhaulHave over 500 hrs on my 912s and it looks like it’s due for a carburators overhaul.I do not feel like I am good enough to do it myself, so… Started by Harmen van der Velden |
5 |
Dec 24, 2022 Reply by Neil Cooper |
912 Engine Preservation Document/ProcedureI will not use my airplane for about 10 months Can you help me locate preservation procedure for 912 engines (I only see documents for two… Started by Shai Brenner |
1 |
Dec 21, 2022 Reply by Matt Pope |
Rotax CHT Sensor replacementI find that Rotax 912ULS CHT Sensors, part 965531, cost $195 each. Has anyone found a more economical replacement? Started by Jack E Martin |
4 |
Oct 4, 2022 Reply by Michael Hage |
Ivoprop on 912 - no engine damage after full-power crashJust a brief note here on one odd little advantage of having an Ivoprop, an inexpensive but also less efficient prop that some fancier one… Started by Peter Chapman |
1 |
May 31, 2022 Reply by Daniel Biton |
Rotax gearbox newbiehi everyone complete newbie to the Rotax world ... I know thier motors are bulletproof...but was curious about the gearing im quite famil… Started by Michael T. |
2 |
May 11, 2022 Reply by Matt Pope |
Engine Installation Resources...Reminder: Zenith builders working on their engine installation (including Rotax) can make use of Zenair's FWF resources at http://www.zenai… Started by Zenair Ltd. |
2 |
Apr 21, 2022 Reply by Zenair Ltd. |
Anyone using the Edge Performance EP915ECII have been looking at the Rotax 912ULS but do not want to mess with carbs and want more HP than the 100HP it offers. This EP915ECI is a c… Started by David Aug |
9 |
Mar 13, 2022 Reply by Heath Lowry |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Custom Upholstery Kits for your Zenith Aircraft:
Zenith Vinyl Upholstery Kits
Zenith Apparel from EAA:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
© 2023 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).