Thanks, Victor,

I found a non Ridgid tube bender made in China and distributed here by Superior Tool Company, Cleveland, Ohio, that looks exactly like the Ridged model for 15 USD.  I'm going to take a chance on it since it appears to be rather well constructed with curved channels on both arms of the bender to match the three tubing sizes.

But I cannot find a Ridgid Flaring Tool 458 with a 37 degree cone.  The only one I am finding with a Google Search is for the 458R model which has a 45 degree cone only for various size tubing.  Are you certain that the model 458 creates 37 degree cone shape?  Is 37 degree cone required for the AN fittings or will a 45 degree flare work as well?  As you can see, I am a real novice on these technicalities.  I've repaired and replaced old copper tubing on my camper over the years and really didn't pay too much attention to the cone flare angles.

About Sarah's dock, I'll bet she would let you tie up there if you asked.  However, I know she and Todd have become much more concerned about security and safety for their children since she has become a bit of a national figure, but they are still rather open and regular folks.  Not too far down the lake from their place is the Best Western Lake Lucille in which is open to any and all visitors.   Don't have to be a customer of the lodge to tie up there, although I'm sure the owners would hope visitors would spend the night. 

If you do plan an Alaska visit; particularly Wasilla, be sure to let me know.  Email is beartrax at mtaonline dot net.  I would like to meet and see you and your finished project. 

Bill

Victor,

Thanks for the info...Guess I'll wait before ordering any. I'm only 5'7" tall. Do you think the 4" forward set you mentioned would work for me, or maybe even a little more forward ?

Jim

Hello,

My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.

Michael Mccarthy.