Online Community of Zenith Builders and Flyers
Posted on May 9, 2012 at 3:53pm 2 Comments 0 Likes
the control mixer bearing comes pre drilled and the attachment holes are offset from the Mixer tube hole. One set of holes is far enough away from the tab on the control mixer that the tab will not "stop" on the bolt heads. Installed on the other side of the fuselage the bolt heads will stop or limit the control mixer travel. The updated photo assembly guide clearly shows the tab between stops. The plans show the tab not between the bolts that would limit travel. Anyone asked the factory…
ContinueClassified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
Comment Wall
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers