How dose the engine get cooling air with this type of cowling?

Hello every one,

I have this type of cowling http://www.zenith.aero/photo/dry-fit-cowling-8 and going to be installed to CH750 airframe, for Rotax 912S. The question is    dose the engine need in let openings for air cooling from the front of the cowling puting in consideration the high temp. in Saudi where it reaches 47c in summer time.? 



Thank you all members for sharing experience 



Views: 356

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Adel Alyahya on August 4, 2011 at 12:30pm
Thank you for the comments , and would likt to see a lower cowl flap photo to know how it is done , and any tips will be helpfull
Comment by Mike MacLeod on August 3, 2011 at 8:19pm

With my 601XL/Rotax 912S combo I find that engine temps are a real problem.  The issue is the cylinder wall temperature.  The Rotax installation manual (not the operating manual) sets a limit of 375 degrees F.  I installed 2 thermocouples as specified by Rotax on the cylinder walls to measure these temps. They are way HIGH!! easily approaching the limit on climb out on a hot day (and staying there even though the oil and coolant temps are well within the green). I called Rotax to ask about this (and why this is not specified by the operating manual).  I was told that maybe 400 degrees would be safe!!  

I added a lower cowl flap as best I could and that helped some but I am considering cutting holes in the front of the cowl to let more air in.  I also find that increasing speed to > 110 kts helps.  Good luck.

Comment by Bob McDonald on July 31, 2011 at 8:42pm
You might install a lower cowl flap to increase the volume of air exiting the cowl. See pages 5 & 6 of my Can-Zac Spycam photo album to see how cowl flap can be made. My CH750 has no cowl flap, no cooling issues. My CH601HD has an oil cooler located close to the muffler so I built a cowl flap to increase the volume of air exiting the cowls.
Comment by Bill Alexander on July 30, 2011 at 6:31pm

Adel,

Remember that the 912s is cooled by three ways, Water through the heads, an oil cooler, and last, air across the cylinder fins. The cowling you have will work fine as designed. There is a large opening for air to the radiator and oil cooler. the other opening on top of the cowling lets air in across the top  of the engine.I live in SC and right now it is about 102 F every day. No problems with overheating. If anything most 912s have a hard time in a pleasant climate getting up to operating temperature. 

Bill

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service