Online Community of Zenith Builders and Flyers
Posted on March 22, 2016 at 4:22pm 0 Comments 2 Likes
A couple of pics of my engine choice
Found it on barnstormers
Had been looking for a cam100 and found this one with 250 hours on it.
Older Honda civic EW2 engine core - good reliable engines
The 2.4 - 1 PSRU is a really beefy titanium,…
Posted on March 21, 2016 at 7:51pm 1 Comment 0 Likes
Had a bit of runout on the forward spar top rivet line. (2.5 mm)
Checked the zenith construction…
ContinuePosted on February 21, 2014 at 2:40pm 5 Comments 1 Like
Root nose rib 75-w-4-1 drawn out does not match to root rear rib 75-w-4-2
if I where to make the nose rib x=0 and y=90 instead of 80, and do the same to the rear root rib, it would look more like the drawing of the nose and rear rib together, on pg 75-wa-1
Any suggestions…
Posted on February 6, 2013 at 10:49pm 5 Comments 2 Likes
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
Comment Wall (3 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
If you are looking for a good brake to build try Macsmachine.com. I built this one and have a video of it on my page. Good Luck
Hi Peter
I just want to confirm, a "Bending Brake" as you call it. is it a sheet-metal bender?
If this is what you are referring too, I'm still trying to make a plan myself. started bending last night, but really struggled. I ended up making this JIG< and it seems to have worked well. I still have to sort out some sort of metal sheet bender, will send photos if i get it right.
Cheers
Deon
Hi Peter
Deon here from South Africa, Welcome. I see you taking on the same challenge as myself. Have you started with anything so far