Online Community of Zenith Builders and Flyers
Had a bit of runout on the forward spar top rivet line. (2.5 mm)
Checked the zenith construction manual
Will run a staggered rivet line with same pitch in the affected area ( this time along the center of the spar flange )
Any tips or techniques for getting the rivet lines exact on center? No predrilled holes when plans building.
Comment
Never perfect, but use Starrett 18-A automatic punch set on low impact then use #40 drill first. Need to keep an eye out that the drill bit does not wander even with the latter. Of course use a CL gadget for narrow pieces and a nice long steel rule to mark CL on skin rivet lines. In my opinion automatic punch is a must for rivet removal, particularly A5 rivets.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers