Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,836)
| Discussions | Replies | Latest Activity |
|---|---|---|
Zodiac 650B - Best way to rivet the baggage floorDear Zodiac 650B builders, I am finally close to riveting the forward part of the fuselage. I need some advice about the best way to rivet… Started by Larry Zepp |
3 |
Jul 12, 2017 Reply by Larry Zepp |
Beautiful weathercock-planeHello, Juste to invite you to see beautiful weathercock-plane on the web site : http://angelo.pagavino.free.fr For my last birthday it was… Started by GERMAIN |
1 |
Jul 12, 2017 Reply by GERMAIN |
CH 650 B with Viking 130 EngineMy question to everyone is this: Is there anyone building or flying a 650 with a Viking 130 engine under LSA regulations? And if so, how do… Started by Scott Smith |
6 |
Jul 11, 2017 Reply by Jan Eggenfellner |
Throttle cable too tightI am getting ready for my inspection and while doing some taxi tests I noticed that my throttle slowly creeps inwards, thereby increasing r… Started by Paul Sanders |
4 |
Jul 10, 2017 Reply by Joe Spencer |
Upcoming 750Is it necessary to install either a mechanical fuel pump or electric fuel pump in a 750 Stol fuel system? Or both. Started by jeff will |
15 |
Jul 10, 2017 Reply by Joe Spencer |
750 instrument panelI ordered a blank panel for my 750. I didn't order the entire kit, so I'm doing the instrument panel first just to keep myself busy. My que… Started by jeff will |
4 |
Jul 8, 2017 Reply by jeff will |
siding bending brakeMy son did the siding on my house and to expedite the job I bought a siding brake off of Craigs list for $300. Now that the job is done, ra… Started by Pat Kelly |
4 |
Jul 6, 2017 Reply by Mark Gravatt |
6061 T6 VS T6511Does anyone know the difference if any between the 2. I'm a machinist and have access to material to make all of my small parts but it all… Started by Pat Kelly |
5 |
Jul 6, 2017 Reply by Mark Gravatt |
Canada vs USA building proceduresJust curious are you allowed to use nylock nuts in the engine compartment in the USA? And 1/4 in fuel line from wing tanks to carbs.I think… Started by Ron Crook |
9 |
Jul 6, 2017 Reply by Ron Crook |
Garmin 327 transponderI bought a used certified Gamin 327 transponder for my 601. I m now ready to wire the inputs. I have a copy of the instillation manual, but… Started by Gil DeVault |
3 |
Jul 6, 2017 Reply by David Krakowsky |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
