Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,967)
| Discussions | Replies | Latest Activity |
|---|---|---|
Dzus Fastners for the Wing LockersAttached is a photo showing t trial pieces for the Dzus fastners. I was calculating the hole spacing and sizes and then doing a small trial… Started by Richard Simmons |
8 |
Mar 23 Reply by Harley Myler |
Lithium battery on Rotax 912IS?I have a Skytec firewall forward kit on CH 750 STOL with a 912is engine. In Zenith youtube video 10 years ago they recommended NOT to use L… Started by Klark Kent |
5 |
Mar 18 Reply by Dean Wichmann |
CH750 STOL with Dynon autopilot questionHello all, I have a CH750 STOL with a UL Power 350IS engine. It has a Dynon Skyview and 2 axis autopilot. I'm having some difficulty gettin… Started by David Fryday |
2 |
Mar 16 Reply by David Fryday |
Reasonable Airspeed????Got the 912UL running smoothly, the dual throttles adjusted and the MGL EIS working so took advantage of this beautiful day to test everyth… Started by Bert Shivers |
7 |
Mar 11 Reply by Jerry Griego |
ch750 to sit in, near austin txHi, are there any builders/owners in the Austin TX area willing to let me sit in their ch750 aircraft to see if i can fit? I am 6'4" with… Started by pat jorden |
3 |
Mar 11 Reply by Patrick Hoyt |
Static port locationI am at the point in building my 750 super duty that I need to place the static port. I’m not sure where to put it to prevent any pressure… Started by Leon Everett |
11 |
Mar 2 Reply by Bert Shivers |
How to install fuel tanks in 750I’m building a 701 with long range tanks. Its the new wing design. Apparently its the same as the 750 wing because those are the drawings… Started by Paul Steger |
3 |
Mar 1 Reply by John Burns |
Manual and test programHas anyone put together a good 750 manual (POH) or a good flight test program that made the FAA happy? Ed Started by Dr. Edward L. Olds III |
9 |
Feb 22 Reply by Roberto Bartholo |
Engine Bolt TorqueHi building a 701, torquing the engine mount bolts to 37 ft lbs deformed the distance tube and gouged the cup washer. I found it difficult… Started by Shaun D |
5 |
Feb 18 Reply by Shaun D |
Flush Rivets for Seat Back SupportsThe Seat Pans that came with our Cruzer kit are about 4mm narrower than the plans call for (381mm instead of 385mm). This means that we ha… Started by William Carter |
2 |
Feb 16 Reply by William Carter |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
