Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,861)
| Discussions | Replies | Latest Activity |
|---|---|---|
Slick mag cap wiring orderI need help with figuring out the wiring order on my slick mags at the cap. I can’t seem to find any info so any help would be appreciated.… Started by Steven Ward |
2 |
Nov 22, 2019 Reply by Alain Dufresne |
Rudder cable outlet fairing fairlead 75C4-1Plans say mount inside fuselage, but i saw a picture of it installed outside the fuselage under the outlet fairing. Which is correct? Started by Steve Ihde |
4 |
Nov 20, 2019 Reply by Michel Ruf |
Which Zenith Model makes the Best Amphibious Float Plane?I've heard it said the Cruzer is a better choice for a float plane. Talking to float plane guys, they stress being able to get off the wate… Started by bud smith |
13 |
Nov 18, 2019 Reply by bud smith |
701 Drawing 7H4-1 Stabilizer SkinThe drawing clearly states the top side of elevator skin is the side with 18mm bent flange with the trailing edge pointing up. However, th… Started by Jim and Amelia Isaacs |
6 |
Nov 18, 2019 Reply by Jim and Amelia Isaacs |
Tundra Tires X 3After I fitted out the mains on my stock CH 701 with 21 800X600 Tundra tires from Dresser I immediately knew that something had to be done… Started by Phil Smith |
8 |
Nov 13, 2019 Reply by Phil Smith |
Anyone used an EZ-Burr tool?I am curious if anyone has used a tool called the EZ-Burr (https://ezburr.com/). It is a drill mounted bit with a retractable blade that is… Started by Damon Brantley |
8 |
Nov 12, 2019 Reply by Daniel Niendorff |
Lycoming o-235 bafflingDoes anyone have access to drawings or sketches for the baffling or airbox for the 750 stol with the o-235? Id like to build as much from s… Started by jeff will |
11 |
Nov 6, 2019 Reply by Jason Huberd |
Aux.or Boost fuel pumpsI was asked to tear down a plane that had crashed, and find the problem , the FAA and Rotax had inspected the plane and decided it was a pi… Started by Bob Jones |
38 |
Nov 6, 2019 Reply by Michel Ruf |
Is the 750 landing gear proprietary or is it Grove or some other brand?Is the 750 gear Grove or another brand? Started by Christopher Braun |
15 |
Nov 5, 2019 Reply by Dan Hill |
Erroneous Fuel Flow IndicationMy STOL 750 has an Electronics International FT-60 "Red Cube" fuel flow sensor. The signal wire goes to my MGL RDAC XF interface board, th… Started by John Austin |
16 |
Nov 4, 2019 Reply by Lance W Miller |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
