Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Replacement bunggeI see in the latest video that Zenith have come up with a new nose wheel system apparently all aircraft at Oshkosh have them installed and… Started by Chris Hoare |
25 |
Feb 25, 2019 Reply by Barry. Gartshore |
Baggage area rivets versus anchor nuts and machine screwsI am building a Cruzer and have placed the sheet metal behind the seats with clecos. Considering future inspections and maintenance I was… Started by David Banahan |
8 |
Feb 24, 2019 Reply by Don Morrisey |
AUSFLY NarromineRoll call for attendees to Ausfly this October. I am the new Australian Zenair distributor, but unfortunately my demonstration aircraft wi… Started by James Fisher |
1 |
Feb 23, 2019 Reply by Greg Priest |
Designed and Made a walking Panel to put on FloatsStarted by Bob Jones |
3 |
Feb 23, 2019 Reply by Daniel Niendorff |
Winter snap vent installationDoes anyone have a tip on installing the snap vents while it's cold. I have considered heating with a heat gun, heating in an oven to 125… Started by David Banahan |
2 |
Feb 23, 2019 Reply by Richard Carson |
Rudder and stabilizer hinge bracketsI bought some hinge material from a local metal supplier But the aluminum angle does not have a radius on the inside corner of the angle.… Started by Michael T. |
9 |
Feb 23, 2019 Reply by Jeff Bailey |
engine test bed planHello folks, I am looking for DIY plans for Engine Test Bed or Dynamo for me so I can excerise run my engine while I am building, it's taki… Started by Kenneth Buchmann |
4 |
Feb 22, 2019 Reply by John Austin |
rustcrashed my Czech built 701 amphib, the steel pipe coming out of the float that the spreader bar slides over rusted from the inside out this… Started by rodney sheridan |
5 |
Feb 21, 2019 Reply by Mike Scalera |
Home Page ViewIs anybody else experiencing having a large blank area show up where new builder submitted pictures used to show up. I get the sidebars, bu… Started by Perry Delano |
7 |
Feb 20, 2019 Reply by Bob Pustell |
nut under rivit, what to do?Started by John Fisk |
6 |
Feb 17, 2019 Reply by Perry Delano |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).