Online Community of Zenith Builders and Flyers
Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Zenith 801 EmpennageFolks, I had high hopes a couple of years ago when I attended the Rudder workshop and built a rudder for an 801 - but I have realized that… Started by Jim Pantas in Classified / For Sale Postings |
0 | May 22, 2014 |
Help with assembly of daul side tilt canopyI bought a partially assembled 601 HDS kit in November. The kit, the plans, the construction sequence etc are all vintage 1993 and leave a… Started by Van Anthony in Open Discussion Forums (non model specific) |
6 |
May 22, 2014 Reply by Van Anthony |
Any idea what brand of portable intercom might be?I have this Intercom in some airplane stuff I bought. No brand name on it. It have a picture of a small biplane on it. It says ICS Intercom… Started by Vance Simons in Open Discussion Forums (non model specific) |
3 |
May 21, 2014 Reply by Willy Trinker |
Ridge Soaring the Sequatchie Valley in a 750!I live in the head of the Sequatchie Valley in mid-east Tennessee. It averages a few miles wide, 1000' deep, and runs arrow-straight for ab… Started by John Austin in Open Discussion Forums (non model specific) |
2 |
May 21, 2014 Reply by John Austin |
Forum Query: Manifold pressureContext: Fixed pitch prop / fuel injected engine without any sort of boost / CH750 Necessary gauge or not? Pro's or cons...let's hear 'e… Started by David J. Beaulieu in Open Discussion Forums (non model specific) |
5 |
May 18, 2014 Reply by David J. Beaulieu |
Best site to sell partial 701 kit?Hi, My 701 building activity has been dead in the water since December 2009. I want to sell the parts, and the completed sections. Since th… Started by Mike Rosiak in Open Discussion Forums (non model specific) |
9 |
May 18, 2014 Reply by Mike Rosiak |
Low and Slow in an A320!"Low and Slow" (just like a Zenith STOL!) but in an A320! (Listen to the altitude call-outs!) Low and Slow (But heck, that's nothing! I… Started by John Austin in Open Discussion Forums (non model specific) |
2 |
May 17, 2014 Reply by John Austin |
SOLD!!! Complete STOL CH 750 kit - unassembled in Arizona $15,000I purchased kit #75-7801 on August 30, 2009 for $21,395.92. This is the complete airframe and finishing kit. It has long range fuel tanks,… Started by Wiggy Greacen in Classified / For Sale Postings |
9 |
May 17, 2014 Reply by Wiggy Greacen |
Ray Allen rockers and trim indicatorsI have a Brand New set of Ray Allen NEEDLE trim indicators (2) and rocker switches (2). These have never been installed and include label… Started by Brad Rawls in Classified / For Sale Postings |
1 |
May 14, 2014 Reply by Brad Rawls |
Fiberglass nosebowl for Corvair engineNeed help on obtaining a fiberglass nosebowl - William Wynne doesn't seem to support his catalog Started by Richard Jones in Open Discussion Forums (non model specific) |
2 |
May 13, 2014 Reply by Richard Jones |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2025 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).