Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Question regarding 701 buildSo what is the reasoning behind the 2 piece longeron on the aft fuselage? All four longerons call for an overlap and splice in the center.… Started by Scott Smith in Open Discussion Forums (non model specific) |
5 |
Dec 14, 2019 Reply by Lawrence Bird |
Welcome to the Rotax Engine Forum!Welcome to the Rotax Engine Forum! We invite our members with Rotax engines, and those with interest in Rotax engines, to post their quest… Started by John Austin in Rotax Engine Forum |
11 |
Dec 12, 2019 Reply by John Austin |
Any ideas on running the fuek/pitot/electrical lines to the fuse bottom?Well, it was a frustrating evening. I planned on running the above lines down the fuselage channel, similar to what John Austin (i think)… Started by Carl Orton in Open Discussion Forums (non model specific) |
6 |
Dec 12, 2019 Reply by Carl Orton |
wanted firewall forward ch701 to suit RotaxHello have a friend with a project looking for a firewall forward to suit Rotax on CH701 anything you have considered cheers Started by Deane Philip in Classified / For Sale Postings |
3 |
Dec 11, 2019 Reply by Jason Scholten |
EarthX Lithium BatteryThinking of upgrading to Lithium EarthX battery to go with my UL350i engine. Any suggestions as to model (battery size) and suggestions of… Started by Ralph Powell in UL Power Forum |
33 |
Dec 10, 2019 Reply by John Bell |
Want to buy Nflightcam Audio Solution for GoPro Hero 5 - Hero 8Looking for a Nflightcam Audio Solution cable for my GoPro Hero 5: If you have one for sale in good working order, contact me via private… Started by John Austin in Classified / For Sale Postings |
0 | Dec 10, 2019 |
Solid works installationI've downloaded and unzipped but the installation manager wants a serial number. Where do I get that or what am I doing wrong? Started by Pat Kelly in Open Discussion Forums (non model specific) |
13 |
Dec 10, 2019 Reply by Steven Mogg |
AVMAP EKP-IV. ***SOLD***Great moving map, will talk to Dynon equipment. I just removed it from my panel for a different setup. This includes everything you would n… Started by Todd Scruton in Classified / For Sale Postings |
4 |
Dec 9, 2019 Reply by Robert Shoukry |
Ray Allen trim servo and rocker switch. ***SOLD***As stated Ray Allen servo and rocker switch as seen below. I’m not going to use this as I have one already for my Z. Shipping included via… Started by Todd Scruton in Classified / For Sale Postings |
2 |
Dec 6, 2019 Reply by Todd Scruton |
J3 Cabin heat boxI’ve got a J3 cabin heat box in good condition. I’m using the Bellanca unit I have instead. $60 shipped via USPS to the lower 48. Started by Todd Scruton in Classified / For Sale Postings |
0 | Dec 6, 2019 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
