Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
CH650 Rivet helpHi everyone, I have tried to contact Zenith via the web form and direct email over the last 2 weeks with no luck so will post here hoping… Started by Jayson Wallis in Open Discussion Forums (non model specific) |
11 |
Sep 6, 2019 Reply by Dan Hill |
Flying Zenith’s In KansasI am new to CH750s. I just purchased mine July 29th 2019. I have put little over 40 hours in it getting use to it and practicing power off… Started by Robert M in Open Discussion Forums (non model specific) |
1 |
Sep 5, 2019 Reply by Timothy D. McCall |
Rust on ClecosJust purchased 50 1/8” Clecos that were advertised as new old stock. Well most of them have rust on them. Not too bad but I am wondering if… Started by Robert Boyd in Open Discussion Forums (non model specific) |
1 |
Sep 5, 2019 Reply by Damon Brantley |
How often do you have to add oil?As on any plane I check the oil before each flight and make sure it is in range, when it gets near the bottom end of the range add enough t… Started by Jonathan Fay in Viking Forum |
11 |
Sep 5, 2019 Reply by Jan Eggenfellner |
Viking Talks Part 2 - FAQ - You Asked, We AnsweredAs we continue on with this series please continue to ask questions or let us know content you may want to see moving forward. -Alissa Started by Jan Eggenfellner in Viking Forum |
2 |
Sep 4, 2019 Reply by John Heather |
Avionics Rack MountingHi All; I’m at the early steps of fitting my instrument panel. All seems pretty straightforward except for the radio stack/rack. I'm usi… Started by Carl Orton in Open Discussion Forums (non model specific) |
5 |
Sep 4, 2019 Reply by James Clapper Jr. |
750 STOL tail kit new in boxI purchase a 750 STOL tail kit from a local builder who went another direction with his flying. The rudder was built by him but the rest of… Started by Michael Busbee in Classified / For Sale Postings |
8 |
Sep 4, 2019 Reply by Mark Schleier |
Cutting Access Holes with Dremel Router Attachment?I'm considering adding access holes with covers to my STOL 750 so I can inspect and clean the area aft of the Rear HT Frame without removin… Started by John Austin in Open Discussion Forums (non model specific) |
8 |
Sep 4, 2019 Reply by Jim and Amelia Isaacs |
New Custom Bubble Canopy on my 701 !!!!!!Recently worked with an Airplane Plastics Co to design and produce a beautiful custom bubble canopy for my 701. Installed it a few days ago… Started by Tim Verroi in Open Discussion Forums (non model specific) |
11 |
Sep 3, 2019 Reply by Tim Verroi |
FOR SALE ACCEPTING OFFERS ASSEMBLED CH750 STOL COMPLETE EMPANAGEFOR SALE ACCEPTING OFFERS for an assembled tail kit including Rudder, Horizontal Stabilizer, Elevator & Elevator Trim, and wired Elevet… Started by Robert Shoukry in Classified / For Sale Postings |
7 |
Sep 3, 2019 Reply by Mark Schleier |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
