Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
VDO Fuel Tank Electrical PostThe electrical post w/white plastic insulator on one of our VDO fuel tank senders pivots, and the other does not. We did not notice this m… Started by Loren Warner in Open Discussion Forums (non model specific) |
6 |
Jul 6, 2018 Reply by Loren Warner |
O-200 On 601XLMy original build had a "stock" O-200. Off eBay as a core and flew as a engine out of a Cessna 150. Worked OK but climb and speeds were ba… Started by Glenn Johnson in Continental Engines |
6 |
Jul 5, 2018 Reply by Glenn Johnson |
Oil change standI made a small oil change stand, so I don't have to balance the oil pan on the tire. Cutting a notch in the end on the top for the front fo… Started by David Orr in Continental Engines |
2 |
Jul 5, 2018 Reply by Don Morrisey |
Viking 90 HP as replacemt for Rotax 582 on CH701 (1987 kit)Would the viking 90hp be suitable for an early CH701 kit, from 1987, with 960 gross? Started by Joe S. in Viking Forum |
2 |
Jul 4, 2018 Reply by Jan Eggenfellner |
Help, advice needed nowI'm David Banahan. I live in Campbellsville KY (KAAS). I have met two young men who are ferrying a 750 STOL from Charlotte, NC to somewhe… Started by David Banahan in Open Discussion Forums (non model specific) |
12 |
Jul 3, 2018 Reply by David Banahan |
Air/Oil Separator?While I'm still a long ways off toward building my O-200 let alone installing it, I was wondering if anyone's installed an air / oil separa… Started by Carl Orton in Continental Engines |
3 |
Jul 3, 2018 Reply by Glenn Johnson |
Joining flap form blocksHi guys I’m making my flap form blocks they are pretty small triangles ... 250mm long and 35mm on end for these smaller type blocks do y… Started by Michael T. in Open Discussion Forums (non model specific) |
0 | Jul 1, 2018 |
new pattern proceduredHave any of you heard about standard pattern procedures being change to, unless stated all patterns will be left hand turns, and no more c… Started by Gil DeVault in Open Discussion Forums (non model specific) |
4 |
Jun 30, 2018 Reply by JEFF COCHRAN |
Purchased the Viking 130Dale C. was selling his 750 Cruzer project and had a buyer for his airframe, but not the Viking firewall forward and 130 engine. I was not… Started by Jonathan Fay in Viking Forum |
4 |
Jun 29, 2018 Reply by Loren Warner |
Viking 130 in the Zenith 601 and low winged modelsStarted by Jan Eggenfellner in Viking Forum |
0 | Jun 25, 2018 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
