Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Wanted: Warp Drive prop for 0200Looking for a warp drive 3 blade prop for my 750. Thanks.......Scott mascher7@yahoo.com Started by Scott Mascher in Classified / For Sale Postings |
1 |
Jan 3, 2017 Reply by Todd Scruton |
601XLBI have a 0-235 with a wood prop. To get the weight & balance I added 5# weight in the tail. When Landing I use full up elevato… Started by Gary Heininger in Open Discussion Forums (non model specific) |
7 |
Jan 2, 2017 Reply by Jeff Garrett |
Oil pressure rotax 912 80hpIs it normal for the pressure to be higher at lower rpm and then lower pressure at higher rpms? Normally I would think the pressure would b… Started by Charles Neels in Open Discussion Forums (non model specific) |
6 |
Jan 2, 2017 Reply by Shay King |
Hangar BlingTaxied in last fall and saw the attached Started by Phil Smith in Open Discussion Forums (non model specific) |
3 |
Jan 1, 2017 Reply by Phil Smith |
912 AirboxI got a Rotax 912 airbox here that's been buried under other stuff on the parts shelf for several years and it's finally worked it's way to… Started by Joe Spencer in Open Discussion Forums (non model specific) |
1 |
Jan 1, 2017 Reply by Timothy D. McCall |
Tip to improve your control cable shacklesI have a tip that will greatly improve the fit and function of your control cable (and rudder cable) shackles. Hope this helps. Write up a… Started by Mark Pensenstadler in Open Discussion Forums (non model specific) |
3 |
Dec 30, 2016 Reply by Mark Pensenstadler |
GTX 327 Transponder for saleLike new, but gently used Garmin GTX 327 Transponder for sale. With rack, connector, and new pins for sub D connector. This is the transpo… Started by Samuel McNair in Classified / For Sale Postings |
0 | Dec 29, 2016 |
O-200 parts source pushrods tube seals newer designI have a continental O-200 of recent (2006) vintage. It has the newer spring loaded pushrods tubes. I want to replace the seals on the tube… Started by David Krakowsky in Open Discussion Forums (non model specific) |
2 |
Dec 28, 2016 Reply by David Krakowsky |
My trip to the Oakland FSDO for the Repairmen's CertificateI went to the Oakland FSDO today to get the repairmen's certificate which allows you to do your own annuals. The examiner had told me only… Started by Gary Welch in Open Discussion Forums (non model specific) |
9 |
Dec 28, 2016 Reply by Gary Welch |
corvair manualAnybody have William Winn's manual on installing the corvair in a zenith 750 that they would like to sell? Started by David Keith Minnich in Open Discussion Forums (non model specific) |
3 |
Dec 24, 2016 Reply by JEFF COCHRAN |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
