Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
Chris Heintz Zenith Monoplane C-GNYM Serial #1 - Prototype is For Sale as Fund Raiser for 99sZenith Monoplane Collectors Plane For Sale. It was great hearing from you and thank again for the awesome tour of the YWG ACC!! Please find… Started by Jill Oakes in Classified / For Sale Postings |
0 | Nov 6, 2014 |
elbow fittingWhen attaching an elbow fitting (http://www.aircraftspruce.ca/catalog/hapages/an822.php) to a fuel valve (or anything else, for that matter… Started by Carlos Sa in Open Discussion Forums (non model specific) |
12 |
Oct 30, 2014 Reply by Carlos Sa |
Enginewhich engine is more suitable for ch 750 Started by João Carlos in Open Discussion Forums (non model specific) |
12 |
Oct 29, 2014 Reply by Geoff Klestadt |
WW Cowling for Corvair & 601-HDSI am having problems fitting the two halves of the fiberglass cowling together. It looks like the parts were removed from the mold before t… Started by Russell Johnson in Open Discussion Forums (non model specific) |
2 |
Oct 29, 2014 Reply by Timothy D. McCall |
Cowling overlapBuilt a mock-up of the cowling top panels today. The fuselage sides and top skins extend past the fire wall about 2.75" How much should the… Started by Russell Johnson in Open Discussion Forums (non model specific) |
1 |
Oct 29, 2014 Reply by Timothy D. McCall |
Ch 750 wing spar doubler question.Hello, I'm starting to lay out my spar for my right wing. I'm having troubles interpreting the strut angle that get riveted to the do… Started by Jesse Hartman in Open Discussion Forums (non model specific) |
2 |
Oct 26, 2014 Reply by Jesse Hartman |
new sprag clutch.HI All, I just had a new sprag clutch installed on my 912 ULS, re installed the engine and found that it is very hard to hand prop comp… Started by Ron Johnson in Open Discussion Forums (non model specific) |
2 |
Oct 25, 2014 Reply by James R Depfer Sr. |
Stripped out bolt hole in nylon nose wheel bearingI am assembling the nylon nose wheel bearing block for my CH 650. I drilled and tapped the required four holes 1/4-28 for the AN4H-5A bolt… Started by Jim Snyder in Open Discussion Forums (non model specific) |
4 |
Oct 25, 2014 Reply by Wayne Koski |
MGL XTreme EMS "Plug and Play" InstallationAfter learning a plug-compatible graphic display monitor for my GRT EIS 6000 was not going to happen anytime soon, I decided to upgrade to… Started by John Austin in Open Discussion Forums (non model specific) |
9 |
Oct 23, 2014 Reply by David J. Beaulieu |
Search Rotax 912 80-100hpI'm looking for my project airplane : you need complete engine Rotaks 912 80-100hp, -1000-1300 hours on new engine or crashed with a small… Started by Sirodja Lopugas in Classified / For Sale Postings |
0 | Oct 23, 2014 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
