Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,812)
| Discussions | Replies | Latest Activity |
|---|---|---|
Flaring toolAnyone selling his flaring tool for 3/8" soft aluminum tubing? Started by Jan van 't Schip in Classified / For Sale Postings |
0 | Dec 27, 2010 |
How are you doing your Coax cables...?What are builders doing about their coax cables? Buying cables already pre-fabricated? Making your own? I'm partial to making my own, b… Started by Patrick Hoyt in Open Discussion Forums (non model specific) |
11 |
Dec 23, 2010 Reply by Stefan Wagener |
NTSB Safety Recommendation - 601XLI received these from the chief scientist at the NTSB responsible for investigating recent 601XL crashes and flutter incidents. Started by David X Johnson in Open Discussion Forums (non model specific) |
34 |
Dec 21, 2010 Reply by Alfonso Lebron-Berges |
What do I need in a compressor?Before starting this project I probably had little more than a hammer and a few screwdrivers in my garage, and now I have all kinds of tool… Started by Paul Sanders in Open Discussion Forums (non model specific) |
2 |
Dec 20, 2010 Reply by Scott Sutton |
Fuel Line ConnectionI’m getting ready to run the fuel lines in my 750. The Zenith kit uses rubber lines from the right wing to the left wing, down a side chan… Started by Stanley Couvillon in Open Discussion Forums (non model specific) |
2 |
Dec 18, 2010 Reply by Stanley Couvillon |
NAV antennaI was thinking of adding a NAV antenna to my 650 project. Any one have particularly successful install locations? I was thinking on the… Started by Christopher Nail in Open Discussion Forums (non model specific) |
0 | Dec 17, 2010 |
701 fuse and tail for sale. $3000Ive decided to sell my beloved 701 project. This is a plans built fuse using many factory supplied parts, like all welded assemblies, firew… Started by Mark Jimenez in Classified / For Sale Postings |
2 |
Dec 13, 2010 Reply by Mark Jimenez |
Stall speedAnyone who has these stall speeds for 701? No flaps 0 x kt 20 x kt 40 x kt 60 x kt Flaps 0 x kt 20 x kt… Started by Olov Larsson in Open Discussion Forums (non model specific) |
0 | Dec 13, 2010 |
Aileron Cutout Channel SupportI'm fitting the aileron trim tab onto an already built aileron. Because of the orientation of the outboard rib the cutout channel is only… Started by Randy Irons in Open Discussion Forums (non model specific) |
5 |
Dec 11, 2010 Reply by Randy Irons |
Zenith 701 90 HP for Sale in TexasZENITH 701 • $49,000 2009-912-90 hp rotax conversion of a 80 hp that has dome pistons and the 100 hp bolt pattern hub with warp dri… Started by FRED BURG in Classified / For Sale Postings |
0 | Dec 11, 2010 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
