Michel Ruf's Discussions (217)

View

Discussions Replied To (28)	Replies	Latest Activity
"Here you go" Michel Ruf replied Jun 15, 2021 to Check lists	2	Jun 15, 2021 Reply by Glen Bradley
"For Aeroled's pulsar you need 20 gauge. You can use 4 conductors for following funct…" Michel Ruf replied Mar 14, 2021 to wiring for position and strobe lights.	8	Mar 14, 2021 Reply by Michel Ruf
"You need to take shielded wire for strobes. Refer to installation manual of strobe m…" Michel Ruf replied Mar 14, 2021 to wiring for position and strobe lights.	8	Mar 14, 2021 Reply by Michel Ruf
"Hi Bob, yes that's clear. The C Lead is now switched by the master switch. So if I…" Michel Ruf replied Feb 7, 2021 to Rotax 912 ULS Rectifier Wiring	2	Feb 7, 2021 Reply by Michel Ruf
"No prob, send me a PN. Seems not to work in the post" Michel Ruf replied Jan 15, 2021 to Maintenance spreadsheet	7	Apr 1, 2021 Reply by David J. Beaulieu
"Hi Jim, right on the spot. Thanks a lot. Michel" Michel Ruf replied Dec 10, 2020 to Rotax’s service bulletin on carburettor	8	Dec 12, 2020 Reply by Chris Hoare
"My engine is not in the serial no. list. But I had to exchange the floats with SB-91…" Michel Ruf replied Dec 7, 2020 to Rotax’s service bulletin on carburettor	8	Dec 12, 2020 Reply by Chris Hoare
"I use this" Michel Ruf replied Nov 8, 2020 to Maintenance spreadsheet	7	Apr 1, 2021 Reply by David J. Beaulieu
"Here a picture of my installation. Engine temps are good." Michel Ruf replied Jul 22, 2020 to Exhaust pipe wrap	14	Nov 19, 2021 Reply by Neil Cooper
"Yes, goes under the expansion tank to avoid chafing. My Rotax engineer glued it to t…" Michel Ruf replied Mar 18, 2020 to Where should this part go?	3	Mar 18, 2020 Reply by Michel Ruf

RSS

Welcome to
Zenith Aircraft Builders and Flyers

Sign Up
or Sign In

Or sign in with:

New from Zenith:

Zenith Planes For Sale

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

West Coast USA:

Pro Builder Assistance:

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Zenith Aircraft Builders and Flyers

Michel Ruf's Discussions (217)

"Here you go"

"For Aeroled's pulsar you need 20 gauge. You can use 4 conductors for following funct…"

"You need to take shielded wire for strobes. Refer to installation manual of strobe m…"

"Hi Bob, yes that's clear. The C Lead is now switched by the master switch. So if I…"

"No prob, send me a PN. Seems not to work in the post"

"Hi Jim, right on the spot. Thanks a lot. Michel"

"My engine is not in the serial no. list. But I had to exchange the floats with SB-91…"

"I use this"

"Here a picture of my installation. Engine temps are good."

"Yes, goes under the expansion tank to avoid chafing. My Rotax engineer glued it to t…"

New from Zenith:

Builder & Pilot Supplies: