Chris Aysen's Discussions (309)

Discussions Replied To (168) Replies Latest Activity

"When you lay the stab flat on the table and the twisted end is more than 3/8" off th…"

Chris Aysen replied Jan 11, 2013 to some twist in my horizontal stab.

16 Jan 11, 2013
Reply by Chris Aysen

"I don't recommend the "rattle can" idea. Get yourself a good expoy primer and paint.…"

Chris Aysen replied Jan 11, 2013 to "prime and paint because it's steel"

16 Apr 4, 2020
Reply by John Austin

"Paul - I can't say for sure because obviously I can't see your parts; but most of th…"

Chris Aysen replied Jan 9, 2013 to "prime and paint because it's steel"

16 Apr 4, 2020
Reply by John Austin

"Steve. Welcome. Read your page. There's alot of guys on this site that know their st…"

Chris Aysen replied Dec 18, 2012 to Newbie saying Hello to everybody in the house

9 Dec 20, 2012
Reply by Steve

"Jesse - Bend the T6 cold and you must have proper grain direction. Also the radius i…"

Chris Aysen replied Dec 10, 2012 to Making main gear for ch 750

8 Dec 10, 2012
Reply by Jesse Hartman

"Sweated this for weeks before I spoke to Chris Heintz personally about this when I m…"

Chris Aysen replied Nov 5, 2012 to Forming that 3mm leading edge of the Rib

10 Nov 13, 2012
Reply by Robert Moehlenkamp

"Chris - If you are using the traditional left/right cutting snips; my experience is…"

Chris Aysen replied Nov 5, 2012 to Edge surface

10 Nov 11, 2012
Reply by John Austin

"I agree with Bob."

Chris Aysen replied Oct 25, 2012 to Powder coating steel parts

7 Nov 29, 2017
Reply by John M Greiner

"Tony - As far as the sending units the rubber gasket worked fine for me; 4 years and…"

Chris Aysen replied Oct 19, 2012 to Fuel Tanks – Modern Fuels – Thread Lockers and Sealants - In Need of Some Advice

21 Oct 26, 2012
Reply by Tony Oliver

"Put the oil because the oil is in a fixed position; always going to be there. This g…"

Chris Aysen replied Sep 21, 2012 to Weight and balance

10 Sep 23, 2012
Reply by Dr. Edward L. Olds III

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service