Online Community of Zenith Builders and Flyers
View
Discussions Replied To (5) | Replies | Latest Activity |
---|---|---|
"Greg, Finally bought a good angel drill should have don it at the start of the proj…"rob steenweg replied Mar 3, 2015 to Angle Drill |
19 |
Jul 8, 2015 Reply by Timothy Aanerud |
"Larry, I did install both the aux and the main tank fuel QTY XMTR on the top usin…"rob steenweg replied Mar 3, 2015 to Better seal for gas tank float sending units? |
28 |
May 25, 2021 Reply by John Bell |
"Jerry, An external mounted antenna would work a lot better than a Rubber ducky,…"rob steenweg replied Feb 8, 2015 to CH 701 Handheld Radio Antenna |
5 |
Feb 8, 2015 Reply by Bob Pustell |
"Write wire identification on heat shrink with a sharpy it will work fine after shrin…"rob steenweg replied Oct 30, 2010 to Labeling wires behind the panel...? |
8 |
Nov 13, 2010 Reply by Jake Reyna |
"I am using a 3/8 wide wood sizzle very sharp with round corners, it does not leave a…" |
just now |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).