Online Community of Zenith Builders and Flyers
UL 350 iS Herman advised me to check all six head bolts on each cylinder ; turned out to be good advice !! fuel pressure is a little higher with both pumps running at same time ; the banjo fittings on the fuel pumps seeped at the higher pressure ( both pumps on ) any body else dislike the banjo fittings ?
Tags:
Craig, is there more to this story? Why did Herman advise checking the six head bolts? I just checked ULPower service bulletins and there is no such advice there. Were you having some issue?
WRT the banjo fittings on the fuel pumps, I have not had any problems with them, but I did just replace the hoses feeding the fuel pumps - they were overdue for replacement.
What kind of fuel pressures are you reading?
Herman did not state a specific reason , I was already thinking that if it was important to check the torque on the four easy to get to head bolts then they all needed checked , therefore his encouragement sealed the deal . Fuel pressure in flight 51 psi ? in the middle of the green bar on Dynon as prescribed by UL Power
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).